Sim2 Multimedia NERO 3D-2 Color, Tint, Sharpness Mode, Noise Reduction, Filter, Cinema Mode

white objects surrounded by light objects with lower level lighting, and try to ensure that all the objects can be separately identified.

Color

This control (also called Saturation) increases or decreases the picture color intensity. When set to zero, color images are shown in black and white. Increase the value until the colors appear natural: suitable references include skin tones and the green in grass in landscape shots.

Tint

This adjustment controls the purity of colors. Basically it determines the red-green ra- tio of the picture. Decreasing the value increases the red content of the image, in- creasing it increases the green content. For this adjustment use skin tones or a test card image with color bars as a reference. This adjustment is primarily used for NTSC sourced material.

Sharpness

This adjustment increases or decreases the level of picture detail. When the sharpness value is reduced the image details appear less pronounced, while increasing the value raises image definition, making the outline of objects sharper. Note that an excessively large value may result in a noisy picture and the outline of images will have a high amount of edge enhancement.

Sharpness Mode

This adjustment selects the type of processing associated with sharpness adjustment. For an interlaced or progressive video signal, set to Video; for PC graphics signals, set to Graphics. If the Video option is set, it applies Noise Reduction to increase the clar- ity of the image.

Noise Reduction

This adjustment lets you choose the value of the noise reduction filter.

Filter

This adjustment selects the mode in which the input signal is processed. Selecting the most appropriate value for a given input signal ensures the best horizontal and vertical definition and makes the picture sharper.

Cinema Mode

Use this option if the video signal source is a movie film (obtained from a Telecine device with 3:2 or 2:2 pull-down). In this case a deinterlace algorithm optimized for this type of signal is applied. Selecting Auto mode causes the deinterlacer to analyze signal characteristics and apply the correct deinterlace mode automatically.

Mode (Nero 3D-2/3D HB)

This adjustement is available only on the Nero 3D-2 and Nero 3D HB. When viewing 2D contents, you can choose between two user modes:

•PureMovie allows a pure and unprocessed presentation of the signal coming from your source. You can then choose whether or not to engage the Dynam- icBlack function

•PureMotion specifically created for fast-action material, yields smooth mo- tion, free from smear or judder

4 Operation	Nero 3D	25
	User Guide