Language
Selects the desired OSD language. The Nero 3D can display the menus in English, Itali- an, French, German, Spanish, Swedish, Portuguese, Russian and Simplified Chinese.
Source List
Allows customization of the Input list. To change the status of an input:
1.highlight the input
2.use the ◂ and ▸ keys to Enable or Disable the input.
Disabled inputs are not shown in the input selection menu and cannot be selected via keys
Important: Active inputs are numbered according to their position in the list. Chan- ging the status of an input modifies the numbers assigned to the inputs that follow (which is undesirable if you are using a custom control system).
You can change the label of each input (for example assigning the name of the device it is connected to). To rename an input:
1.highlight the input
2.press ● on the remote control to enter Text Entry menu
3.use the ◂ and ▸ keys to underline the character you would like to change
4.enter the desired symbol using keys
5.cycle through steps 3 and 4 until you have finished entering your custom label
6.press ● on the remote control to save the label you have entered, or Esc to discard your changes
F1-F2 Keys
You can have direct access to some functions through the F1 and F2 keys on the re- mote control.
The default assignments are: F1 = Zoom, F2 = Focus. To assign a different function to one of these keys:
1.highlight the function using ▴ or ▾
2.press F1 or F2 to set the key assigned to that function. Available functions are:
• Zoom Activates the optical zoom control, where the ◂ and ▸ keys zoom out and in respectively. By pressing ● on the remote control a specific internal test pattern is displayed. This is the default function for key F1.
• Focus Once selected, ◂ and ▸ allow the image to be focused. By pressing ● on the remote control a pattern a specific internal test pattern is displayed. This is the default function for key F2.
• Blank Turns off the video signal
• Gamma correction Activates Gamma Correction quick menu. Use ▴ or ▾ to cycle through available Gamma tables.
• Freeze Turns on or off picture still mode.
Source Information
When enabled (Yes), the projector displays information about the current input signal every time a new signal is detected. If disabled (No) no information is displayed.
4 Operation | Nero 3D |
| User Guide |
31