Sharpness, Filter and Noise Reduction will appear on after the other in the lower part of the screen by pressing ▴ or ▾.
Messages
The following messages may appear on your screen:
•No signal. The projector does not recognize any signal applied to the selected input. In this case:
◦make sure the selected input is connected to a video or graphic signal and that this source is functioning correctly.
◦check the condition of the cables used to connect the system to the vari- ous sources.
◦make sure the video or graphic signals supplied by the source are compat- ible with the system technical specifications and, in particular, with those of the selected input.
•Out of range. This message appears when either the resolution or the vertic- al/horizontal frequency of the input signal exceeds system specifications (for example a QXGA graphic signal).
4 Operation | Nero 3D | 35 |
| User Guide |
|
|
|
|