Insignia
4 Select Air for an outside antenna. Select | Selecting a digital | |
Cable, Cable HRC, Cable IRC, or Cable | Most digital TV channels have more than one | |
Auto for cable TV. We recommend that you | ||
channel. The main channel carries the signal for | ||
select Cable Auto for cable TV. For more | ||
the main TV program. The | ||
information about cable TV selections, | ||
signals for additional or alternate programming, | ||
contact your cable TV provider. | ||
such as a radio or news broadcast. | ||
5 Press the EXIT button to close the | ||
For example, if the main channel number is 8, | ||
menu system. | ||
the | ||
Setting up the channel list | ||
After you select your TV source (antenna or | To select a | |
cable), you need to set up the channel list. When | ||
1 Press the number buttons for the main | ||
you set up your channel list, your TV searches | ||
channel, for example 8. | ||
for all available channels in your area and stores | ||
2 Press the – button, the press the | ||
a list of the channels. When your press the | ||
CH – or + button, your TV skips the channels | button, for example 1. | |
that do not have a signal. | Adjusting the volume | |
|
Automatically setting up channels
To automatically set up the channel list:
1Press the MENU button.
2Press the or button one or more times to highlight Setup, then press the OK or button to open the Setup menu.
3Press the or button one or more times to highlight Auto Ch Search.
To adjust the volume:
•Press the VOL – or + button to decrease or increase the volume.
•Press the MUTE button to turn off the sound. Press the MUTE button again to turn the sound back on.
Displaying status information
4Press the OK or button to start the search.
Note
You can press the Exit button to stop the search.
Manually adding or deleting channels from the channel list
After you create a channel list using the Auto Ch Search option, you can manually add or delete channels from the channel list.
To display status information:
•Press the INFO button. Your TV displays status information, such as the channel number or signal source.
Selecting the video input source
To select the video input source:
•Press the INPUT button one or more times to select the video source. You can select:
•
To add or delete channels:
1Press the MENU button.
2Press the or button one or more times to highlight Setup, then press the OK or button to open the Setup menu.
3Press the or button one or more times to highlight Manual Ch Set, then press the OK or button to access the Manual Ch Set options.
4Press the or button to select a channel, then press the OK button to add or delete a channel.
5Press the EXIT button to close the menu.
Changing channels
To change channels:
•Press the CH – or + button on the remote control to go to the next lower or higher channel.
Or
Press the number buttons to select a channel. For example, if you want channel 83, press 8, then press 3.
Or
Press the button to go to the last viewed channel.
•
•
•
•
•
•
•
Checking the DTV signal strength
To check the DTV signal strength:
1Press the MENU button.
2Press the or button one or more times to highlight Setup, the press the OK or button to open the Setup menu.
3Press the or button one or more times to highlight DTV Signal, then press the OK or button. Your TV shows the DTV signal strength.
Adding a channel label
To add a label to a channel:
1Press the MENU button.
2Press the or button one or more times to highlight Setup, then press the OK or button to open the Setup menu.
13 | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|