3M 2550, 2573 manual Safety Information, Intended Use

1. Safety Information

Please read, understand and follow all safety information contained in these instructions prior to the use of the 3M™ Dynatel™ Pipe/Cable Locators 2500 Series. Retain these instructions for future reference.

Intended Use

The 3M Cable/Pipe/Fault 2550/2573 Series Locators are used to identify the place- ment of underground utility lines. The system must be installed as specified in the

3M™ Dynatel™ Cable/Pipe/Fault Locator 2550/2573 Series Operator's Manual. It has not been evaluated for other uses or locations. If this equipment is used in a manner not specified by 3M, the protections provided by the equipment may be impaired.

Explanation of Signal Word Consequences

!Warning: Indicates hazardous situation which if not avoided, could result in death or serious injury.

!Caution: Indicates hazardous situation which if not avoided, could result in minor or moderate injury.

Explanation of Product Safety Label Symbols

Do not throw away in normal trash.

C Warning: Risk of electric shock

!WARNING

This WARNING applies to the following 3M Dyna-Couplers;

•3" (75 mm) - Part number 3001

•4.5" (114 mm) - Part number 4001

•6" (150 mm) - Part number 1196

•All accessory kits containing any of the listed Dyna-Couplers - Part numbers 3019, 4519, 1196/C

A potential for electrical shock exists when using the Dyna-Coupler on cables energized with electrical power. Use appropriate safety procedures.

DO NOT USE ON CABLES CARRYING IN EXCESS OF 600 VOLTS RMS.

78-9000-0192-2 Rev C 5