3M 2550, 2573 manual Rev C

Page 53

Step 2. Press View/Edit [SK].

Four Write Mode options will be displayed at the bottom of the screen.

−− [SK1] Overwrite: Will overwrite any data existing on an unlocked marker if ‘Yes’ is selected and ‘No’ will prevent overwrite.

−− [SK2] X-Type: Choose ‘Yes’ if writing to a Gen 2 marker and ‘No’ if writing to a Gen 1 marker. Gen 2 markers will have an “X” following the serial number that is printed on the attached tag.

−− [SK3] Marker: Select type of marker to be written by repeatedly pressing Marker [SK Toggle].

−− [SK4] Lock/Unlocked: Press [SK4] to toggle between locking and unlocking the marker. The default setting is unlocked and note that a locked unit cannot be modified once locked. If the marker will be locked then a verification screen will appear to ensure that the marker is locked intentionally.

Step 3. Press Menu/OK

The selected template will be displayed. The arrow on the right side of the display indicates there is more information than can be displayed on the screen (scroll down by pressing the down arrow [SK]).

Step 4. Press the up/down arrows [SK] to highlight the information to change.

78-9000-0192-2 Rev C

53

Image 53

Contents 3M Dynatel Cable/Pipe/Fault Locator 2550/2573 Series Contents Aerial Faults Toning Cable Identification Rev C Intended Use Safety InformationAbout This Manual Quick Start Transmitter Battery InstallationReceiver Battery Installation Transmitter 2550 Keypad and Connector Definitions Cleaning Receiver and Transmitter UnitsService and Accessories Transmitter 2573Keypad and Connector Definitions Maximum Transmitter Output Rechargeable Battery InformationRubber cover Receiver 2550 Keypad and Display DefinitionsReceiver Receiver Keypad and Display DefinitionsMain Menu Display Menu DisplaysMain Menu/Locate Menu Main Menu Display Rev C Setting the Receiver Clock Configuring The ReceiverSelecting Depth Units Selecting a LanguageSelecting Locate Modes Antenna Modes Enabling/Disabling Locating FrequenciesCreating User Defined Frequencies Selecting External Jack Frequencies Tone FrequenciesMenu/OK 5Toggle to Main Menu + More SK4 + SK5 + SKc Adjusting Display ContrastSelecting Locating Audio Direct Connect Method Locating Buried Cables And PipesTransmitter Connections Rev C 3M Dyna-Coupler Method Induction Method Non-SweepingPassive Induction Mode LocatingPassive Sweeps Sweeping Active Induction Mode LocatingOne-person Active Induction Mode Sweeps Transmitter Set-up Two-person Active Induction Mode SweepsTrace View T-View Receiver Locating Trace ModesInduction Peak Ind Pk Special Peak Spl PkLeft of Target Path Directly Over Target Path Directional Peak Dir PkDirectional Null DirNull VOL 13 press up arrow Expanded ModeDepth and Current Estimate Active Frequencies Power FrequenciesLocating Frequencies Auxiliary Frequencies Passive FrequenciesLocating in Directional Peak Mode Rev C Locating Active Duct Probes Sondes Determining Active Duct Probe Depth Transmitter Setup Locating Buried Sheath Faults And Earth Return FaultsPinpointing the Buried Fault Rev C Enabling/Disabling Marker Types Alert ModeLocating 3M Electronic Markers and 3M iD Markers Single Marker Locate 3M iD Marker Depth Dual Marker LocatePassive Electronic Marker Non-iD Depth Creating New Templates Creating/Editing Templates for 3M iD MarkersRev C Rev C Editing Templates Writing 3M iD Markers Menu/OK 5Toggle to Main Menu + Write Mode SK11Rev C Modifying Marker Data to be Written Press Menu/OK 5Toggle to Main Menu + Write Mode SK1Rev C Rev C Read History Reading 3M iD MarkersReviewing Marker Read/Write History GPS Compatibility Operation Capturing the GPS Coordinates Capture Mode / ModeWrite History SK Menu/OK 5Toggle to Main Menu + SK3 + NmeaMenu/OK 5Toggle to Main Menu + SK3 + GIS Path Mapping with GPSMenu/OK 5Toggle to Main Menu + SK3 + GIS SK or PDA SK Creating Trace TemplatesAdditional Applications Transmitter SetupCable Identification Connection DiagramsTransmitter Setup Menu/OK 5Toggle to Main Menu + More SK4 + SK7 Help ModeReceiver Setup Menu/OK 5Toggle to Main Menu + More SK4 + S/N# SK6 Dynatel PC Tool Kit and Locator Software UpgradesSelf Test of Receiver Product Description Product Description And Optional AccessoriesStandard Configurations Locator Coupler Accessory Kit, 4.5 114 mm 4519 Optional 3M Accessories for 3M Dynatel LocatorsLocator Coupler Accessory Kit, 6 150 mm 1196/C 2876Specification Receiver SpecificationsDetection Depth 3M Non-iD Passive Meter mode can display a fault resistance up to 10M Ω Watt Transmitter SpecificationsRechargeable Battery Information Environmental and Regulatory SpecificationsRev C Important Notice Electrical Markets Division