Changing Program Languages
2.Select the System Setup option.
3.Select the Installation option.
4.Select the Factory Defaults option.The receiver displays a Warning message, prompting you to confirm that you want to reset the receiver.
5.Select the Yes option to confirm the reset. The receiver resets, and then displays the Installation and Setup menu.
Changing Program Languages
You may be able to change the language of some programs. An alternate language may not be available for all programs. Some programs, such as movies, show at the start whether an alternate language is available. An alternate language applies only to the audio part of a program and does not change the language used in the menus displayed by the receiver.
1.Press the MENU button.
2.Select the System Setup option.
3.Select the Alternate Audio option.
4.Select the language you want in the Languages list.
Note: Alternate provides
5.Select Save to save your language choice. The receiver displays the
System Setup menu.
6.Press VIEW TV to exit the System Setup menu.
Control Other Devices with the Remote
Remote Control Modes
You can set the remote to four different modes to control the receiver or other devices. This section explains how to set up the remote to control a device, such as a satellite TV receiver, a TV, a VCR, a DVD player, a tuner, or an amplifier.
To set the remote to the right mode for a device, use the remote control’s mode buttons, SAT (satellite receiver), TV, VCR (for a VCR or a DVD player), and AUX (“auxiliary,” for a DVD player, or an audio amplifier). To change the mode, press the button for the device you want the remote to control. The mode button flashes once to show you’ve set the remote to that mode.
Tip: You can choose an alter- nate language (if available) but this applies only to the audio part of a program and does not change the language used in the menus displayed by the receiver.
Page 53
Page 53