Dish Network Solo 311 manual Leased Equipment

Page 96

Appendix

E. Your DISH Network receiver contains components and software that are proprietary to DISH Network. You agree that you will not try to reverse-engineer, decompile or disassemble any software or hardware contained within your receiver or our Smart Card. Such actions are strictly prohibited and may result in the termination of this Agreement, disconnection of your Services and/or legal action.

F. To optimize the operation of your Equipment, you must connect each DISH Network receiver on your account to a land-based telephone line. For accounts containing multiple receivers, each receiver must be continuously connected to the same land-based telephone line. Failure to connect each receiver to the same land-based telephone line may result in interruption or disconnection of Services.

G. If your Equipment is stolen or otherwise removed from your premises without your authorization, you must notify our Customer Service Center immediately, but in any event not more than three (3) business days after such removal to avoid liability for payment for unauthorized use of your Equipment. You will not be liable for unauthorized use that occurs after we have received your notification.

H. You are licensed to use the software provided in your DISH Network receiver(s), as updated by DISH Network from time to time, solely in executable code form and solely in conjunction with lawful operation of the DISH Network receiver(s) that you purchased or leased. You may not copy, modify or transfer any software provided in your DISH Network receiver(s), or any copy thereof, in whole or in part. You may not reverse engineer, disassemble, decompile or translate such software, or otherwise attempt to derive its source code, except to the extent allowed under any applicable laws. Any attempt to transfer any of the rights, duties or obligations of this license agreement is null and void. You may not rent, lease, load, resell for profit or distribute any software provided in your DISH Network receiver(s), or any part thereof. Such software is licensed, not sold, to you for use only under the terms and conditions of this license agreement, and DISH Network and its suppliers reserve all rights not expressly granted to you. Except as stated above, this license agreement does not grant to you any intellectual property rights in the software. If you breach any term or condition of this license agreement, this license agreement will terminate immediately upon notice to you.

5. LEASED EQUIPMENT

A. DISH Network may, from time to time, lease certain Equipment to subscribers. If you elect to lease Equipment from DISH Network, the terms and conditions of the applicable promotional lease agreement shall apply, which are in addition to (and without limitation of) the terms and conditions of this Agreement. Unless otherwise provided in your promotional lease agreement, such Equipment shall at all times remain the sole and exclusive property of DISH Network and we will have the right, in our sole discretion, to provide or replace leased Equipment with new or reconditioned Equipment and to remove, or require the return of, such Equipment upon cancellation or disconnection of your Services for any reason. None of such Equipment shall be deemed fixtures or part of your realty. Our ownership of such Equipment may be displayed by notice contained on it. You shall have no right to pledge, sell, mortgage, otherwise encumber, give away, remove, relocate, alter or tamper with such Equipment (or any notice of our ownership thereon) at any time. Any reinstallation, return of, or change in, the location of such Equipment shall be performed by us at our service rates in effect at the time of such service. You shall not attach any electrical or other devices to, or otherwise alter any, Equipment without our prior written consent. We reserve the right to make such filings as may be determined to be necessary by us in our sole discretion to evidence our ownership rights in such Equipment, and you agree to execute any and all documents as may be so determined to be necessary for us to make such filings. You are responsible for preventing the loss or destruction of leased Equipment and we recommend that such Equipment be covered by your homeowners, renters or other insurance policy.

B. Upon termination of your Services, you must notify our Customer Service Center or call the telephone number set forth in your promotion agreement to schedule the return of your leased Equipment. If such Equipment is not returned in working order, normal wear and tear excepted, certain charges will apply as described in your governing promotion agreement. You are responsible for, and agree to pay, any costs of repair, replacement or other costs if you do not return such Equipment in an undamaged condition.

C. You shall notify us promptly of any defect in, damage to, or accident involving your leased Equipment. All maintenance and repair of such Equipment shall be performed by us or our designee(s). DISH Network may charge you for any repairs that are necessitated by any damage to, or misuse of, such Equipment.

Page 76

Image 96
Contents Contents Contents Safety Instructions Safety Welcome to Dish Network OverviewConventions Used in this Guide If YOU Need More Assistance Quick Start GuideOrdering Your Programming To Order ProgrammingFinding Programs To Watch About Satellite TelevisionFinding Programs to Watch Satellite Signal Quality Rain and Snow FadeSolar Interference Parts of the System Front Panel Back PanelRemote Control Remote Control BatteriesParts of the System Remote Control Using the Remote Control in SAT ModeUsing the Remote Control in TV Mode Using the Remote Control in VCR Mode Changing the Remote Control Address Satellite Video Recovery Remote Control ModesControl Other Devices with the Remote Control Other Devices with the RemoteLimited Mode SET UP the Remote ControlScan for Device Codes For AUX mode only. The first Check the Device CodesControl a Tuner or Amplifier AUX Mode Button Power ButtonVolume Button Select ButtonTo switch back to TV volume control, do the following Using TV or Amplifier Volume ControlMenus MenusMain Menu Program GuideTheme Categories Menu Favorites Lists MenuSystem Locks Menu System Setup Menu Timers MenuBrowse Banner Installing the Receiver in AN Existing System Installing the Receiver in an Existing System Chapter Using the Menus Changing ChannelsOpening the Menus Closing the MenusHighlighting a Menu Option Selecting a Menu OptionLists of Choices in the Menus Highlighting a Choice in a Menu ListUsing the Menus Canceling a ProcedureUsing the Program Guide Using the Program Guide Opening the Program GuideSelecting a Program in the Program Guide Closing the Program GuideUsing the Program Banner Using the Browse BannerUsing the Browse Banner Using Themes Ordering PAY PER View ProgramsThemes Using Search Using SearchDish Home Interactive TV Applications Using Favorites Lists Using Favorites ListsCreating or Changing a Favorites List Making a Favorites List Active Changing the Name of a Favorites ListUsing Timers Using TimersEvent Timer Types Event Timer FrequenciesBefore AN Event Timer Operates Setting UP AN Automatic Event TimerSelect the Create option to save the event timer Setting UP a Manual Event TimerOverlapping Event Timers Quick RecordMaximum Number of Event Timers Editing AN Event TimerDeleting AN Event Timer Reviewing Event TimersCreating VCR Event Timers LOCKS, BLACKED-OUT PROGRAMS, and Event Timers Power OFF and Event TimersSetting UP the Receiver and VCR to USE a VCR Event Timer Using Locks HOW to SET Locks a TWO Step ProcessUsing Locks When YOU have Locked the ReceiverCreating a Password Creating or Changing Rating Content Code Locks Creating or Changing Channel Locks Locking the ReceiverUnlocking the Receiver Locking the Receiver Front Panel Control ButtonsUnlocking the Receiver Front Panel Control Buttons Locking PAY PER View ProgramsChanging the Receiver Password Hiding Adult ChannelsOpening a Locked ITEM, or Opening the Locks Menu Using Caller ID Using Caller IDCaller ID Screens To Turn the Caller ID on and OFF Changing Program Languages Changing Program LanguagesChanging Menu Languages Resetting the Receiver to Factory Default Settings Using Troubleshooting ToolsResetting Your Receiver Using Troubleshooting Tools DiagnosticsPoint Dish and Check Switch Chapter Troubleshooting Tables ReferenceReference ON-SCREEN MessagesTroubleshooting Tables 078, 079 Dishpro Twin LnbfUsing the Remote Control What Is Possible Reason What to Do HappeningHearing a Program Watching a ProgramUsing the Menus Using the Program Guide or the Browse BannerUsing Locks Using Favorite Lists Changing ChannelsTroubleshooting Tables Using the Telephone for Voice /DATA /FAXBuying a PAY PER View Program Using Event Timers View event You try to set up an eventTV Codes Device CodesVCR Codes Device Codes DVD Player CodesTUNER/AMPLIFIER Codes Tuner Codes AmplifierChapter Reference Troubleshooting Tables Dishpro Twin Lnbf ON, the receiver front Hearing a Program What Is Possible Reason What to Do Changing Channels Using the Telephone for VOICE/DATA/FAX Set up is an Auto-Tune Event Timer , or Device Codes MTC TV/VCR DVD Players Codes DVD/VCR Combo Chapter Limited Warranty What the Warranty CoversWhat the Warranty does not Cover Legal Limitations If YOU Need AssistanceAdvance Exchange Program Accessory Warranty Residential Customer AgreementPost Receipt Exchange Program Dish Network Service Billing Policies and Payments for Services Cancellation of Service Equipment Leased Equipment Transfer of ACCOUNT, Services or Equipment FCC Compliance Telephone CommunicationFCC Compliance Compliance Information StatementAppendix Index Index Index Index 143334