Kathrein CAP 600 manual Special Messages from the Turntable, System Protection Messages

Page 53

SPECIAL MESSAGES FROM THE TURNTABLE

SYSTEM PROTECTION MESSAGES

The following messages are shown on the screen to protect your reception system and the on-board power supply:

The power supply to the turntable is insufficient (battery voltage below minimum value). The turntable can still be moved, but communication errors can occur between the UFS 740sw and the turntable (e.g. when scanning for satellites).

If the voltage falls still further, both the following error messages are displayed:

Check the power supply to the turntable and whether it is obstructed (e.g. by a branch). If both causes of faults are displayed, the turntable motor temperature is in the critical range. Allow the turntable to stand for a few minutes in its current position, until the turntable motor temperature has reduced. You can also however move the turntable to the park position and let it cool down there.

Press the  button and the turntable will move to the park position.

Press the  button to confirm the displayed message. The turntable cannot be moved any more. Check the power supply to the turntable.

Note: The antenna should not be moved whilst the battery is being recharged, to prevent peak loads when turning on.

53

Image 53
Contents CAP Contents Used batteries are special waste Foreign Language Installation MANUAL/DISPOSALDisposal Instructions Product Package Mobiset 2 CAP 600 COMPONENTS/SCOPE of DeliveryProper USE USE for the Intended Purpose Proper USEAdhesive sealant Safety Instructions Important NotesFundamental information Road Traffic Licensing Regulations StVZO Power supply, fusingChecks before commencing a journey Selecting the Installation Location Installation and ConnectionRequired Tools and Equipment Unpacking and PreparationDirection of travel Installation Steps Installation and Connection Installation and Connection Installation of Turntable Figure E Version with External Cable Gland FIG. F Brief Instructions for Installing the Turntable Tightening torque 6 Nm Suspended Installation Installation on a Fixed Flat Surface Reversal is not possible unit will not function Installation and Connection Connection Example for 12 V Battery Connection Reception RANGE/FOOTPRINT Dismantling for Servicing Address of the Service CentreESC DismantlingPolarisation Setting Polarisation SettingSafety Notes On the Turntable Installation ProcessMiddle standard View after installation +15Manual Lowering to Park Position Manual Lowering Dimensions MM Technical DataTechnical Data LNB Type CAPMaterials/preparation and company designation Sikaflex 291 Safety Data SheetComposition/data on components Potential hazardsMeasures if inadvertently released Measures for fire fightingHandling and storage Exposure limitation and personal protective equipmentStability and reactivity Physical and chemical characteristicsEcological data Toxicology data SensitisationDisposal instructions Transport dataOther data Sikaflex-291 Aflex Sikaflex 291 Technical Data SheetChemical Stability CAP 600 Operating Manual Remote Control Important Information for CAP 600 Before SetupFirst Installation TV-SCART-Output Picture formatLocal time offset SystemAlignment Satellite Search Manual Correction Channel Selection from the Channel List Channel Satellite SelectionTimer Programming Change of LOCATION/TIMER ProgrammingResetting the Motorised Antenna RESET/PARKINGParking the Turntable System Protection Messages Special Messages from the TurntableSpecial Messages from the Turntable Messages Arising from Software Problems Further Messages EC Declaration of Conformity Declaration of ConformityFor Your Notes For Your Notes 936.3220/-/0907/ZWT Technical data subject to change
Related manuals
Manual 1 pages 4.49 Kb

CAP 600 specifications

The Kathrein CAP 600 is a cutting-edge solution designed for the modern telecommunications landscape, catering primarily to the demands of mobile network operators and service providers. This compact, high-performance active antenna system is engineered to enhance connectivity in urban environments, significantly improving network efficiency and user experience.

One of the key features of the Kathrein CAP 600 is its multi-band capability. It supports various frequency bands including LTE, 5G NR, and others, making it versatile for both current and future network deployments. This allows operators to seamlessly upgrade their services without needing to overhaul their infrastructure.

The CAP 600 is equipped with advanced MIMO (Multiple Input Multiple Output) technology, which leverages multiple antennas at both transmitting and receiving ends to boost data throughput and reliability. This technology is essential for maximizing spectral efficiency, thus accommodating more users and higher data rates in dense urban areas.

In terms of design, the Kathrein CAP 600 features a compact and lightweight structure. This is crucial for installations in constrained environments where space is at a premium. The antenna's sleek aesthetics also allow it to blend into its surroundings, thereby reducing visual impact, which is often a concern in urban deployments.

The antenna incorporates intelligent software features that facilitate dynamic beamforming. This enables targeted coverage, allowing signals to be directed towards users rather than being broadcast in all directions, thus minimizing interference and optimizing network performance. Additionally, the built-in remote management capabilities allow operators to monitor and manage network performance in real-time, enhancing operational efficiency.

Regarding sustainability, the CAP 600 is designed with energy efficiency in mind. The use of advanced materials and optimized hardware contributes to lower energy consumption, making it an environmentally friendly choice for operators looking to reduce their carbon footprint.

Overall, the Kathrein CAP 600 is a sophisticated solution that meets the high demands of modern mobile networks. With its advanced features, technologies, and commitment to sustainable operations, it represents a pivotal component for any operator looking to enhance connectivity and provide exceptional service in today’s dynamic telecommunications environment.