Main menu - Service menu
Software Update
After calling up the menu you will first see the following display:
All available s modules/components for your receiver will be loaded and then displayed.
The following display then appears:
Use the buttons to select the parameters to be updated during the update procedure.
Show Infotext:
Press the button to display the info text for the available downloads. These indicate the main features of the new operating software, based on which you can decide whether you want to install the new software on your receiver.
Update software:
The loading process can take up to 60 minutes
New software is available: 1:02
Channel list is available
Select “Yes” here if you want to install new software; select “No” if you are satisfied with your old software version and the changes in the new software are not relevant to you.
Updating the channel list:
Select “Yes” here if you want to install the new channel list, or “No” if you want to retain your old channel list. Prior to this you can however also save your old channel list using the “Software Update by USB”, “Save Channel List to USB” menu, so that if you do not like the new channel list you can revert back to the old one.
If a new channel list is loaded, this will be automatically regenerated after each factory reset (Restore Factory Default settings) (see “Service menu”, “Factory Reset”, “Reset Channel List”).
Once you have made all the settings for updating your receiver, switch to the “Start Update” field and press the button. The receiver will now automatically start updating the components you selected.
107