Recording archive (play back/edit recordings)
Selecting the recordings to be edited
To select a recording, select the desired recording in
the selected sort list, using the cursor () buttons (see example screenshot on the right). If the relevant recording is stored in one of the folders you have created, first select the folder containing the recording
using the cursor () buttons and then confirm with
the button. Now select the recording to be edited using the cursor () buttons.
To select several recordings to be edited at the same time, if they are not listed directly following each other
in the selected sort list, use the cursor () buttons to select the first recording to be selected, and then press
the button. The recording is given a coloured background and marked with a tick. Now select the other recordings to be edited at the same time using the
cursor () buttons, and select each further recording
using the button (see example screenshot on the right). To select several recordings that are listed directly following each other in the recording archive, you can start block selection (see “Edit recordings” “Start Blockselection”).
Editing recordings
After selection of the recording(s) to be edited, press
the (red dot) button. The following display appears (see screenshots on the right).
“Start Blockselection” only appears if just one recording has been selected for editing.
87