Connection and setup
Set the turntable so that both of the bars
Select the
Once you have achieved the best reception signal, press the (green) button. The receiver will now save these values for this satellite and skips automatically to the setting for the next satellite.
If you have selected more than one satellite for tuner 1, the receiver will automatically skip to the settings for the second satellite. Now make the settings for the second satellite, followed by the other selected satellites, in the same way as described for the first satellite.
Once all settings for all the satellites that you selected have been completed, the receiver will automatically skip to the settings for the second tuner (assuming that for the second tuner you selected the connection type “Separated” and set the signal configuration to “Different from Tuner 1”). If this is the case, now make the settings for the second tuner in the same way as you did for the first tuner.
Once you have completed the settings for both tuners and the satellites assigned to them, the receiver will automatically display the screen for the channel search. Continue the first installation with the “Channel search” chapter.
Motorized Antenna (DiSEqC™1.3)
Motor Control
Select the control type “DiSEqC™1.3”. Refer to the
documentation for your motorized antenna for details.
My Longitude
Select the “My Longitude” field and use the numeric keypad to input your current longitude.
My Latitude
Select the “My Latitude” field and use the numeric keypad to input your current latitude.
Go to Null Position
Select the “Go to Null Position” field. Press the button to instruct the turntable to move to its null position.
27