DP-1 SET UP Menus

Your DP-1 player has been preset to work perfectly with your Polk Audio Digital Solution system and a standard 4:3 aspect ratio TV. If you have a 16:9 widescreen TV you will have to reset the TV Aspect Ratio in the “Other” section of the DVD setup menu. No matter what gear you have it is always a good idea to check all of these settings to make sure they are correct.

How to navigate and select choices

1. Press the button on either the DR-3 or DR-4 remotes. The setup menu will appear on your TV screen (figure 1).

2.Use the navigation direction buttons to move the cursor around the screen.

3.Press the or button to make a choice.

Setting TV Aspect Ratio

(required if using a 16:9 widescreen TV)

This feature adjusts the video output of the DVD player to match your TV. If you have a standard 4:3 aspect ratio TV, the factory setting of “4:3 Letterbox” is right and you need not change this setting. If you have a widescreen 16:9 TV, you need to change this setting to “16:9 Wide.”

1. Press the button on either the DR-3 or DR-4 remotes. The setup menu will appear on your TV screen (figure 2).

2.Use the navigation button to move down to “TV Aspect.”

3.Press the button and a white arrow cursor will appear next to one of the choices.

4.Use the or navigation buttons to select the type of TV you have as follows: If you have a standard format 4:3 TV, select “4:3 Letterbox.” This setting allows widescreen DVDs to be viewed in their proper aspect ratio.

If you have a 16:9 aspect ratio widescreen TV, select “16:9 Wide.”

5.Make your selection and press SELECT.

6. To exit the Setup menu, press the

button on the remote.

Figure 1

Figure 2

10	www.polkaudio.com