Polk Audio DP-1 manual Vol

DR-3 REMOTE GUIDED TOUR

See the chart on page 6 for the functions of each button with various device types.

1.Source/Device Area – These buttons serve two functions: to select the device that the remote will control and to change inputs on the Digital Solution preamp/processor. For example if you want to play the DVD player, push the “DVD” button on the top row. The Digital Solution preamp/processor will switch to the DVD input (if it is on) and the buttons on the DR-3 remote will be set to operate the DP-1 CD/DVD player.

The top buttons bordered by the gold box are multi-function buttons. That is, they can select more than one input. Press the DVD/6CH button once and it selects the DVD input on the pre- amp/processor and allows the DR-3 to act as the remote for the DP-1 CD/DVD player. Press it a second time and the DS preamp switches to the 6CH Analog input for a DVD-Audio or multi-chan- nel SACD player. What these buttons can’t do is select more than one set of remote codes. You can program ONE device per Source button. Don’t worry, it isn’t very likely that you are going to have both a digital and an analog cable tuner or two DVD players hooked up to your system. Of course, before the DR-3 can operate any device other than the DS preamp/processor and DP-1 CD/DVD player, you have to insert the device’s remote codes into the DR-3. (See page 7 for instructions on how to program and use this remote for other devices.)

IMPORTANT NOTE: The VOL , SURROUND MODE, MUTE, SUB+ and SUB– buttons are permanently assigned to Digital Solution preamp/processor functions. No matter what other device you have selected on the DR-3 remote, you can always adjust the DS system volume, subwoofer level, mute and surround mode functions.

2.LIGHT – Back lights the remote buttons for 8 seconds so you can operate the remote in the dark. The function of this button does not change when you enter program codes for other devices.

3.MUTE – Mutes the sound of the Digital Solution preamp/proces- sor system. To disengage the mute function and go back to normal playback volume, press the MUTE button again or press either of the VOLUME buttons. The function of this button does not change when you enter program codes for other devices.

4.SURROUND MODE – This button toggles between the various audio modes of the Digital Solution system such as stereo, Dolby Pro-Logic, 5 Channel Surround, etc. The function of this button does not change when you enter program codes for other devices.

5.	VOL	– These buttons control the volume of the Digital
	Solution preamp/processor. The functions of these buttons do not
	change when you enter program codes for other devices.
6.	CHNL	– With the Digital Solution system these buttons

step through the preset radio stations just like the Radio Preset +/- rocker buttons on the DR-2 remote (included with the DS System). With other TV devices (TV, cable boxes, VCR, etc.) these buttons act as channel up and down buttons.

7.GUIDE – With DVD and CD players this button acts as a chapter skip button to skip back to previous DVD chapters or CD tracks. With a TV it acts as the “Display” button to call up the channel, time and other on-screen display data. With DSS, cable boxes and TIVO-type devices it calls up the programming guide screen.

Status

Light

1
2	5
	6
3
4
7

www.polkaudio.com 3