REMOTE CONTROLS
There are two remotes included with the DP-1 CD/DVD player. The large, black DR-3 is a unified system programmable/learning remote control that has been pre-programmed to operate the most-often used functions of both the Digital Solution preamp/processor and the DP-1 CD/DVD player. You can also program it to operate other components in your system to reduce “remote clutter” on your coffee table. (See the separate DR-3 Owner’s Manual for instructions on how to program and use this remote for other devices.)
As nifty as it may be, the DR-3 unified remote cannot duplicate every function of the DP-1 CD/DVD player or Digital Solution preamp/ processor without it turning into a nightmare of tiny buttons. For control of the rarely used functions of the CD/DVD player and Digital Solution preamp/processor, you’ll have to use their dedicated remotes, the smaller DR-4, DR-1, or DR-2 remotes. If you can’t find them, look under the sofa cushions; they’re probably there.
Status
Light
1
Notes on Batteries
•Do not leave dead or exhausted batteries in the remote control.
•Do not use different types of batteries together, or mix old and new batteries.
•If you do not use the remote control for a long period of time, remove the batteries to avoid possible damage from battery corrosion.
•Replace the batteries with new ones if the remote control does not function correctly or if the operating range becomes reduced.
•If the batteries leak, wipe the battery liquid from the battery compartment being careful not to get any on you, then insert new batteries.
