Polk Audio DP-1 manual MP-3 Operation, Playing an MP3 CD

Page 18

MP-3 OPERATION

Playing an MP3 CD

1.Turning On the System. Press SYSTEM POWER on the DR-3 remote to turn on the Digital Solution system. Press the DVD Source/Device button and then press the SOURCE POWER button. The CD/DVD player will turn on and the power indicator light will turn green. After a few seconds delay “HELLO” appears in the display of the DVD player. Turn on your TV and select the video input that the Digital Solution system is plugged into.

Note: You can make the turn-on procedure a lot simpler by setting up a “Macro.” The DR-3 remote can be programmed to turn on all of the audio and video components in your system with one button push. See page 12 in the DR-3 manual for instructions on how to set up a Macro.

2.Opening Disc Drawer. Press the OPEN button on the front panel of the CD/DVD player. Or, press ^ TV/VCR on the DR-3 remote. The disc tray opens. You can open the disc tray by pressing this button even if the CD/DVD player is in standby mode (off).

3.Inserting an MP3 CD. Place a disc on the disc tray with the playback side down. Place the disc in the guide on the disc tray. If the disc is out of the guide, it may damage the disc and cause the DVD player to malfunction. Do not place anything except 3" discs or 5" discs on the disc tray.

4.Starting Play. Press ENTER/PLAY. The disc tray closes automatically and the MP3 menu will appear on the TV screen.

If the disc is upside down “NO DISC” or “DISC ERROR” appears

on the TV screen. Flip the disc then use the navigation buttons to select the MP3 file you want to play and then press

ENTER/PLAY.

5.Setting Volume. Use the VOL buttons to set volume to taste using the DR-3.

6.Setting Bass Level. Use the SUB+ and SUB- buttons to set bass level to taste using the DR-3.

7.Choosing Surround Mode. If you want to hear a stereo CD in surround sound, use the SURROUND button to select 5 Channel Surround (surround sound with all speakers playing).

8.Pausing the MP3 CD. To temporarily suspend play, press the PAUSE button. Press the PAUSE or ENTER/PLAY button to resume playing.

9.Listen to music.

10.Relax or dance.

11.Press STOP to stop the playback.

12.The DP-1 CD/DVD player will automatically shut off if left idle for10 minutes.

5 7

8

4

11

2

6

1

18

www.polkaudio.com

Page 17 Page 19
Image 18
Page 17 Page 19
Contents DP-1 Important Safety Instructions Precautions Please read the following carefullyWord from Matthew Polk Connecting the DP-1 Basic SetupGetting Started Remote Controls DR-3 Remote Guided Tour These buttons serve twoRemote Controls Push this button once to pause playing DP-1 SET UP Menus How to navigate and select choicesSetting Digital Audio Output Sample Frequency Setting DRCMenu Language Options Setting a Password Parental Block/Password Menus optionalSetting a Rating Unlocking the Rating BlockDVD Operation Playing a DVDAdvanced DVD Operation Graphic User Interface GUI Menus CD Operation Playing a CDAdvanced CD Operation Functions as shown in the chart figure MP-3 Operation Playing an MP3 CDAdvanced MP3 Operation MP3 NotesTroubleshooting Guide Troubleshooting Guide DVD Player DP-1 SpecificationsPolk Audio Limited Warranty OutputsPolk Customer Service 800 RM2069-1 DR-3 Introduction Programming the RemoteVOL Stop Page DR-3 Function List Button NameProgramming the Remote Manual Three-Digit Code MethodAuto Search Method Finding the Three-Digit Code Number for a DeviceTeaching Method Erasing a Learned Command From a Button To Erase All the Learned Commands One Source/Device ModeErasing All the Learned Commands All Device Modes Restoring Factory ProgrammingMacro Operation Programming the Macro ButtonTo Erase a Macro Sequence Factory Reset Macro Sequence Programming ExampleSetup Codes Manufacturer/Brand Set-Up Code NumberVCR Aiwa Set-Up Code Manufacturer/Brand Set-Up Code Cable TVSet-Up Code Manufacturer/BrandRM2070-1 Page Page
Top Page Image Contents