ITEMS OF ERROR HISTORY MODE ITEMS AND CONTENTS
Selecting the Test Mode
Display |
|
|
|
| Details of History | ||||||
total rec | Displays the recording time. | ||||||||||
| Displayed as “r ππππππh”. | ||||||||||
| The displayed time is the total time the laser is set to the high power state. | ||||||||||
| This is about 1/4 of the actual recording time. | ||||||||||
| The time is displayed in decimal digits from 0h to 65535h. | ||||||||||
|
|
|
|
|
|
|
|
|
| ||
total play | Displays the play time. | ||||||||||
| Displayed as “p ππππππh”. The time displayed is the total actual play time. Pauses are not counted. | ||||||||||
| The time is displayed in decimal digits from 0h to 65535h. | ||||||||||
|
|
|
|
|
|
|
|
|
| ||
retry err | Displays the total number of retries during recording and number of retry errors during play. | ||||||||||
| Displayed as “r ππ pππ”. | ||||||||||
| “r” indicates the retries during recording while “p” indicates the retry errors during play. | ||||||||||
| The number of retries and retry errors are displayed in hexadecimal digits from 00 to FF. | ||||||||||
|
|
|
|
|
|
|
|
|
| ||
total err | Displays the total number of errors. | ||||||||||
| Displayed as “total ππ”. | ||||||||||
| The number of errors is displayed in hexadecimal digits from 00 to FF. | ||||||||||
|
|
|
|
|
|
|
|
|
| ||
err history | Displays the 10 latest errors. | ||||||||||
| Displayed as “0 π E@@”. | ||||||||||
| π indicates the history number. The smaller the number, the more recent is the error. (00 is the latest). | ||||||||||
| @@ indicates the error code. | ||||||||||
| Refer to the following table for the details. The error history can be switched by rotating the | AMS | knob. | ||||||||
|
|
|
|
|
|
|
|
|
| ||
er refresh | Mode which erases the “retry err”, “total err”, and “err history” histories. | ||||||||||
| When returning the unit to the customer after completing repairs, perform this to erase the past error history, | ||||||||||
| After pressing the | AMS | button and “er refresh?” is displayed, press the | YES | button to erase the history. | ||||||
| “Complete!” will be displayed momentarily. | ||||||||||
| Be sure to check the following when this mode has been executed. | ||||||||||
| • The data has been erased. | ||||||||||
| • The mechanism operates normally when recording and play are performed. | ||||||||||
|
|
|
|
|
|
|
|
|
| ||
tm refresh | Mode which erases the “total rec” and “total play” histories. | ||||||||||
| These histories serve as approximate indications of when to replace the optical pickup. | ||||||||||
| If the optical pickup has been replaced, perform this operation and erase the history. | ||||||||||
| After pressing the |
|
|
| button and “tm refresh?” is displayed, press the |
| button to erase the history. | ||||
|
| AMS |
| YES | |||||||
| “Complete!” will be displayed momentarily. | ||||||||||
| Be sure to check the following when this mode has been executed. | ||||||||||
| • The data has been erased. | ||||||||||
| • The mechanism operates normally when recording and play are performed. | ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
Table of Error Codes
Error Code | Details of Error | Error Code | Details of Error |
|
|
|
|
E00 | No error | E05 | FOK has deviated |
|
|
|
|
E01 | Read error. PTOC cannot be read | E06 | Cannot focus (Servo has deviated) |
| (DISC ejected) |
|
|
| E07 | Recording retry | |
|
|
|
|
E02 | TOC error. UTOC error | E08 | Recording retry error |
| (DISC not ejected) |
|
|
| E09 | Playback retry error | |
|
|
|
|
E03 | Loading error |
| (Access error) |
|
|
|
|
E04 | Address cannot be read (Servo has deviated) | E0A | Play retry error (C2 error) |
|
|
|
|
– 3 –