Sony 4-216-349-5, Singapore model, Hong Kong model service manual Record Precedure

Page 7

IOP DATA RECORDING AND DISPLAY WHEN OPTICAL PICK-UP AND NON-VOLATILE MEMORY (IC171 OF BD BOARD) ARE REPLACED

The IOP value labeled on the optical pick-up can be recorded in the non-volatile memory. By recording the value, it will eliminate the need to look at the value on the label of the optical pick-up. When replacing the optical pick-up or non-volatile memory (IC171 of BD board), record the IOP value on the optical pick-up according to the following procedure.

Record Precedure:

1.While pressing the AMS knob and p button, connect the power plug to the outlet, and release the AMS knob and p button.

2.Rotate the AMS knob to display “[Service]”, and press the YES button.

3.Rotate the AMS knob to display “lop.Write”, and press the YES button.

4.The display becomes “Ref=@@@.@” (@ is an arbitrary number) and the numbers which can be changed will blink.

5.Input the IOP value written on the optical pick-up.

To select the number : Rotate the AMS knob.

To select the digit

: Press the

AMS

knob.

6.When the YES button is pressed, the display becomes “Measu=@@@.@” (@ is an arbitrary number).

7.As the adjustment results are recorded for the 6 value. Leave it as it is and press the YES button.

8.“Complete!” will be displayed momentarily. The value will be recorded in the non-volatile memory and the display will become “Iop Write”.

9.Press the REPEAT button to complete.

Display Precedure:

1.While pressing the AMS knob and p button, connect the power plug to the outlet, and release the AMS knob and p button.

2.Rotate the AMS knob to display “[Service]”, and press the YES button.

3.Rotate the AMS knob to display “lop.Read”.

4.“@@.@/##.#” is displayed and the recorded contents are displayed. @@.@ : indicates the Iop value labeled on the pick-up.

##.# : indicates the Iop value after adjustment

5.To end, press the AMS button or MENU/NO button to display “Iop Read”. Then press the REPEAT button.

– 7 –

Image 7

Contents MDS-JE330 SpecificationsSELF-DIAGNOSIS Function Items of Error History Mode Items and Contents Varnig Flexible Circuit Board RepairingExploded Views Table of ContentsDisassembly DiagramsTEO Section Servicing NoteJIG for Checking BD Board Waveform IOPRecord Precedure REC/PLAY Checks Prior to Parts Replacement and AdjustmentsForced Reset Criteria for Determination Measure if unsatisfactoryBit Binary Retry Cause Display ModeHigher Bits Lower Bits Hexa Details Bit When BinaryHexadecimal Binary Location of Parts and Controls Section GeneralFront Panel Case and Front Panel Section DisassemblySlider CAM SW Board and Loading Motor M103 Base Unit MBU-5A and BD BoardExiting the Test Mode Section Test ModePrecautions for USE of Test Mode Setting the Test ModeGroup Selecting the Test ModeOUT Operating the Continuous Playback ModeNon-Volatile Memory Mode EEP Mode MIDFunctions of Other Buttons Test Mode DisplaysMeanings of Other Displays Parts Replacement and Adjustment Section Electrical AdjustmentsCreating Continuously Recorded Disc Precautions for Checking Laser Diode EmissinonPrecautions for USE of Optical PICK- UP KMS-260A Precautions for AdjustmentsSpecified Value Temperature Compensation Offset CheckLaser Power Check Checks Prior to RepairsSelf-Recording/playback Check Play Checking MO Error Rate CheckCD Error Rate Check Focus Bias CheckRecording and Displaying the IOP Information Initial Setting of Adjustment ValueTemperature Compensation Offset Adjutment Laser Power AdjustmentTraverse Adjustment Focus Bias Adjustment MO Auto Gain Control Output Level Adjustment Error Rate CheckAuto Gain Control Output Level Adjustment CD Auto Gain Control Output Level AdjustmentAdjusting Points and Connecting Points Circuit Boards Location Section DiagramsMDS-JE330 Block Diagrams BD SectionLD-LOVO Main SectionDisplay Section For schematic diagramsFor printed wiring boards WaveformsSemiconductor Location Printed Wiring Board BD SectionSchematic Diagram BD 1/2 Section Schematic Diagram BD 2/2 Section Schematic Diagram Main 1/2 Section Schematic Diagram Main 2/2 Section Printed Wiring Board Main Section Printed Wiring Board Panel Section Schematic Diagram Panel Section Printed Wiring Board BD Switch Section Schematic Diagram BD Switch Section IC Block DiagramsBD Section IC101 IC152 BH6511FS-E2 IC121 CXD2654RIC381 M5218AL IC441 LB1641 Main section IC301 UDA1341TS/N2IC406 M62016L IC101 RF Amplifier CXA2523AR BD board IC PIN FunctionsPin No Pin Name Function MNT3 Sloc MNT0 FOKMNT1 Shck MNT2 XbusyAvdd MvciAsyo AsyiFS4 TfdrFfdr FrdrIC501 System Control M30620MC-400FP Main board SDA OPT DEL OPT SEL Mode SELPB-P REC/PBCase and Back Panel Section Section Exploded Views6162 Front Panel Section225 226 206 205 Mechanism Section MDM-5A251 252 Base Unit Section MBU-5AResistors Section Electrical Parts ListDisplay Display KEY SW Main PIN, Connector 7P Inductor Vibrator MDS-JE330 Main SW VOL SEL