Technicolor - Thomson DTH7500 manual DMR / satellite or cable receiver settings

DTH7500_en 4/07/03 16:55 Page 11

Connections and initial set up

DMR / satellite or cable receiver settings

1.Switch on your TV set, your DMR, then your satellite or cable receiver.

2.Place the receiver on channel 02.

With your DMR’s remote control, carry out the following settings:

3.If the main menu is not displayed, press the MENU key on the remote control.

4.Select the Setup line using the and keys, and press OK to validate.

5. Select the Installation line using the	and	keys, and press OK to validate.	EN
The Interactive setup line is already selected. Press OK.

6.Choose a display language for the following screens.

7.Select your country of residence using the and keys, and press OK. The Automatic line is already highlighted, press OK.

The screen which appears is a set-up screen for the allocation of input terminals.

8.If you connected your devices as indicated on page 10, check that AV2-SAT-CABLhas been allocated to Satellite Receiver, or Cable Receiver otherwise change the allocation using the key.

Note: Cable Receiver or Satellite Receiver: to connect with a satellite or cable receiver terminal on the AV2 socket of your DMR (connection shown on page 10). The other settings are explained on page 6.

9.Then select the line Done and press OK.

Note: an installation window will appear. A cursor shows the progress in the set-up of the channels. When all the channels that you can receive in your area have been stored, 100 % is indicated.

Press OK.

From now on, follow on-screen instructions appearing in the various windows. If need be, refer to the additional explanations given below.

11