Connections and initial set up
Automatic channel search
In each region,TV stations are broadcast on different channels.Your DMR cannot be factory-set to receive the TV channels of your area.You will have to set up the channels by following the automatic procedure recommended below.
6.Select your country of residence using the 
or keys, and press OK.
Note:The screen only displays 3 countries at one time. The arrows above and below indicate other possible countries.
Scroll through the list of countries with the 
and 
keys.
On the screen that is displayed, the Automatic option is already selected. Press OK.
The screen displayed is a set-up screen for the allocation of input terminals.
7.If you connected your devices as indicated on page 3, check that Antenna-Cablehas been allocated to Antenna-Cable, otherwise change the allocation using the 
key on the remote control. For the other selections (AV2,AV3,AV4) leave them allocated to Nothing and continue to step 8.
Note: Other terminal settings (set with the 
/ 
keys). The AV2-SAT-CABLconnection is intended for a satellite or cable receiver.The installation of a satellite or cable receiver is explained on page 10.
AV3-Frontand AV4 correspond to the IN or INPUT inputs of a device supplying Composite Video signals (CVBS) or S-Video. The Other option is for connection of another device (video recorder…).
Nothing: If no device is connected to the socket concerned.
8.Then select the Done line with the 
key, and press OK.
An installation window will appear. A cursor shows the progress in the set-up of the channels.You will need to wait a fair amount of time.When all the channels that you can receive in your area have been stored, 100 % is indicated.The number of channels found is indicated by
XXchannels found. Press OK.
Note:Your DMR is equipped with the AV Link. function. This function simplifies channel set-up by downloading them from an AV Link or similar television set (Easy Link, Smart Link, Megalogic, etc.) which is already set up. The channels downloaded in this way keep the same characteristics as those of your TV set (same number, name, etc.).Your DMR’s AV Link downloading function is enabled (factory setting). If you wish to de-activate this function, see page 49.
