DTH7500_en 4/07/03 16:55 Page 25
Recording functions
7.Recording quality
Select a recording quality from the 4 proposed using the 
key. *1 : High, *2 : Normal, *3 : Basic, *4 : Low.
Note: choice of quality enables you to adapt the recording time on the hard disc. The higher the quality the
bigger the space used on the hard disc. Select one of the following options: high, Normal, Basic (base) or Low.
When empty the hard disc of your DMR can contain around 120 hours of recording for a *4: Low quality |
|
adjustment (20 hours in *1: High). The figure 1 to 4 is displayed in the information banner when playing | EN |
the recording. The quality choice is only valid for one particular programming session. |
8.VPS/PDC
Activate the VPS/PDC function using the 
key to trigger recording at the actual time of the beginning of the broadcast. If the channel broadcasts VPS/PDC signals you can avoid the consequences of any delays in broadcasting.This adjustment is only valid for this programming session and for channels received via the aerial (PR -
9.Keep
Memorise your programming by selecting Keep with the 
key and confirming with the OK key.
•The Programming screen reappears.Your programming is now displayed in the chronological list of programming already carried out. On this screen it is only possible to display 5 programming sets from the maximum 16. If you have carried out more than 5 programmings, to see the others press the 
and 
key.
Note: to check (or delete) programming parameters, select a name and press OK. The programming parameters menu appears. Correct the parameters as shown in steps 1 to 9 or delete the programming by selecting Delete and confirming with the OK key.
10.Return to the main menu using the MENU key in order to continue to use your DMR or turn it off using the STANDBY/ON key.
25