Remote control
Using the remote control handset to control your television and satellite or cable receiver
The DTH 8000 remote control handset is a 3 in 1 device that allows you to control the operation of 3 devices: your DTH 8000, a television set, or satellite receiver.This page describes the keys that control your television set and your satellite or cable receiver if they have the same functions.
Controlling a TV set
TV | Sets the remote control unit in TV mode (by pressing once) and enables | EN |
| you then to control your TV set. |
|
| Switches the TV set on or off. |
|
| Volume control. |
|
| Switches sound off or on again. |
|
PR | Switches channel or selects an AV socket. |
|
AV | Selects an AV socket. |
|
0 to 9 | Keys enter digital values or change channel. |
|
ZOOM | Enlarges (zooms in on) the picture on some TV sets. |
|
MENU | Displays main TV set menu. |
|
RETURN | Returns to the previous menu. |
|
CLEAR | Removes menu or other information displayed on the screen. |
|
GUIDE | Displays TV programme guide. |
|
INFO | Displays information about the channel. |
|
Note: colour keys enable one to use the teletext function on THOMSON TV sets.
Controlling a satellite or cable receiver
SAT.CABLE Places the remote control in the SAT•CABLE mode (press once) and then enables you to control your satellite or cable receiver.
To turn on or off the satellite or cable receiver.
Switches channel.
Keys enter digital values or change channel.
To display the main menu of the satellite or cable receiver.
Returns to the previous menu.
Removes menu or other information displayed on the screen.
Displays the Naviclick page (if available).
To display the info on the channel or operation of the satellite or cable receiver.
Remote control - Code A-B
With certain devices (combined TV/DVD or other DVD player) it may happen that your DTH 8000 controls the DVD player of the other device. In this case you can adjust your remote control and the DTH 8000 on another code known as code B (adjustment shown on page 59).
19