Connections and initial set up
Basic connections
Your DTH 8000 has many connection possibilities to allow it to fit into a setup comprising several devices.We recommend that you follow the connection setup on this page, and then carry out the adjustments shown on the following pages.You will first need to set up the channels as explained in the following pages before the final interconnection of the devices, described on pages 9 to 15.
DTH 8000 U
DTH 8000 E
220 - 240 V
50 - 60 Hz 4
TV | EN |
1 |
|
Scart cable | Coaxial Cable |
|
3 | 2 |
DTH 8000
1.Unplug the antenna cable from your TV set and plug it into the
2.Using the coaxial cable supplied, connect the
3.Using the Scart cable supplied, connect the DTH 8000’s AV 1 (TV) socket (TV) to the scart socket of your TV set (labelled AV 1, EXT 1, AUX 1 depending on the brand).
4.Use the mains cable to connect your DTH 8000 to a mains socket, by first connecting the cable to the back of the DTH 8000.
Note: connection to a satellite or cable receiver is detailled on page 9.
3