Further information
Settings
The information relating to the Naviclick TV guide programmes comes from a combination of the TV programmes guide,Teletext and NexTView service transmitted by certain channels.To optimise the Naviclick programmes guide of your DTH 8000, you have the possibility of changing certain settings as shown below.The information from the NexTView service is more reliable than Teletext.
NexTView channel downloading time
The programs are downloaded either at 3 AM or 8 AM.To choose the downloading time, follow the instructions below:
1.If the main menu is not displayed, press the MENU key on the remote control.
2.With the 
, keys, select Setup then Installation followed by Naviclick Setup. Each time, press OK to validate.
3.The line Update Time is already selected, press OK.
4.With the 
keys and OK, select 3 a.m or 8 a.m.
Note: by selecting Off your DTH 8000 will use, where available, the information on TV programmes from the Teletext service of the channel being viewed. For those countries offering the NexTView service we recommend that you set the downloading time to 3am. For all other countries set it to 8am.
Choice of NexTView channel
The downloading of programmes, via the NexTView service, is only possible on certain channels. From step 2 above, select NexTView Channel and choose with the PR+ or PR- keys, a channel that broadcasts a programme guide. Hold the key down for a rapid selection. See the list of channels on the following page.
Updating Naviclick (via Teletext)
Sometimes certain channels modify the organisation of their Teletext journal. In this case, unless there has been a total modification of the structure, you must update the number of the first page of Teletext allocated to the programmes guide.The list of pages is generally broadcast with the Teletext journal. Use the Teletext function of your television set to find this information. Look for the number of the page for the current day programmes and the number of the page for the following day programmes. See also the limited list on the following page.
From step 2 above, select Channel Page and press OK.The menu that is displayed indicates, channel by channel, 2 Teletext page numbers (the first for current day programmes, the second for the following day programmes).
To update this information, place the cursor on the channel to be modified using the 
keys. Then enter the 2 numbers for the correct pages using the number keys.
Note: For correct operation of the Naviclick guide described on page 25, it is indispensable that a Teletext page number (for those channels broadcasting it) is indicated for each channel. The page numbers allocated to channels on this screen were set during the installation of your DTH 8000. We recommend that you do not change them.
56