Playing a disc
Interactive banners
In addition to menus, your DTH 8000 has interactive information banners with icons representing functions or information. Some banners provide access to disc playback functions (for DVDs, CDs,VCDs, etc.) while others give you information on the channels and related functions.
In TELEVISION mode (Operating principle)
1.Turn on your TV set and your DTH 8000.
2.In the Main Menu of your DTH 8000, (Watch TV line selected) press OK.
The picture of the last channel selected appears. An information banner is displayed along with the picture for a few seconds.To view it again, press the yellow INFO.
Information on the TV channel being watched
No. and name of the channel selected on the DTH 8000 (page 21).
Current time 
(Time set page 6).
Name of the present broadcast, as start and end times (page 21).
Indications concerning the channel sound and the selection of audio channels. Selection is possible with the 
key on the remote control.
Recording the channel being watched (here, channel 2)
Time elapsed since the beginning of the recording.
Recording under way (page 22).
Press REC once.
To select recording time press the key several times (while banner is displayed) to extend recording time by 30 minutes up to a total of 3 hours.
è0h30è1h00è1h30 3h00ç2h30ç2h00ç
Name of the present 
broadcast, as start
and end times
(page 21). Indications concerning the channel sound and the selection of audio channels. Selection is possible with the 
key on the remote control.
Remaining recording time available on the disc according to the quality selected (page 22).
32