Other Functions
Adjusting the sound characteristics
You can adjust bass, treble, balance and fader. Each source can store the bass and treble level independently.
1 Select the item you want to adjust by pressing (SEL) repeatedly.
VOL (volume) nBAS (bass) nTRE (treble) nBALANCE (balance) nFADER (fader)
2 Adjust the selected item by pressing (+)
EN | or (Ð). | |
Adjust within three seconds after selecting | ||
| ||
| the item. (After three seconds, the buttons | |
| work as volume control buttons.) |
Muting the sound
Press (MUTE). “MUTE” flashes.
To restore the previous volume level, press (MUTE) again.
8
Changing the sound and beep tone
Enjoying bass and treble even at low volume — Loudness
Bass and treble will be reinforced.
Press (2) while pressing (SEL). “LOUD” appears in the display.
To cancel, press these buttons again.
Muting the beep tone
Press (6) while pressing (SEL).
To obtain the beep tone again, press these buttons again.
Note
When connecting an optional power amplifier to the LINE OUT, the beep tone is disabled.
Turning on the clock
display — Power Select Function
Only for cars with an accessory position on the ignition key switch
To turn the Power Select Function ON
Press (OFF) while pressing (SEL). The Power select Function ties the clock display power to the accessory position on the ignition key switch.
To avoid battery wear, the clock is not displayed while the unit is initializing.
Actual total number: | Sony |
|
|