Yamaha DRX-1 owner manual Important safety instructions, General Information

Page 2

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTSINSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This “bolt of lightning” indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering.

The “exclamation point” calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

CAUTION:

To prevent electric shock, match wide blade of plug to wide slot, and fully insert.

ATTENTION:

Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne correspondante de a prise et pousser jusqu’au fond.

Important safety instructions

1. Read Instructions — All the safety and operating instructions should

be read before the appliance is operated.

2. Retain Instructions — The safety and operating instructions should be

retained for future reference.

3. Heed Warnings — All warnings on the appliance and in the operating

instructions should be adhered to.

structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See Fig.A.

Fig.A.

4. Follow Instructions — All operating and use instructions should be

followed.

5. Cleaning — Unplug this product from the wall outlet before cleaning.

Do not use liquid cleaners or aerosol cleaners.

Use a damp cloth for cleaning.

Exception:A product that is meant for uninterrupted service and that for

some specific reason, such as the possibility of the loss of an

authorization code for a CATV converter, is not intended to be

unplugged by the user for cleaning or any other purpose, may exclude

the reference to unplugging the appliance in the cleaning description

otherwise required in item 5.

6.Attachments — Do not use attachments not recommended by the

video product manufacturer as they may cause hazards.

7.Water and Moisture — Do not use this video product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE (NEC)

GROUND CLAMP

ELECTRIC SERVICE EQUIPMENT

ANTENNA LEAD

IN WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING

CONDUCTORS

(NEC SECTION 810-21)

GROUND

CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

wet basement, or near a swimming pool, and the like.

8.Accessories — Do not place this video product on an unstable cart, stand, tripod, bracket, or table.The video product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the video product.Any mounting of the appliance should follow the manufacturer’s instructions and should use a mounting accessory recommended by the manufacturer.

8A.

An appliance and cart combination should be moved with

care. Quick stops, excessive force, and uneven surfaces

 

 

may cause the appliance and cart combination to

 

overturn.

9.Ventilation — Slots and openings in the cabinet are provided for ventilation, to ensure reliable operation of the video product, and to protect it from overheating.These openings must not be blocked or covered.The openings should never be blocked by placing the video product on a bed, sofa, rug,

or other similar surface.This video product should never be placed near or over a radiator or heat register.This video product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

10.Power Sources — This video product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance supplier or local power company. For video products intended to operate from battery power, or other sources, refer to the operating instructions.

11.Polarization — This product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other).This plug will fit into the power outlet only one way.This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug.

If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

12.Power-Cord Protection — Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles,

and the point where they exit from the appliance.

13.Outdoor Antenna Grounding — If an outside antenna or cable system is connected to the video product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges.

Section 810 of the National Electrical Code,ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting

14.Lightning — For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system.This will prevent damage to the product due to lightning and power surges.

15.Power lines — An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits.When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

16.Overloading — Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

17.Object and Liquid Entry — Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

18.Servicing — Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19.Damage Requiring Service — Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a.When the power-supply cord or plug is damaged.

b. If liquid has been spilled on, or objects have fallen into the product. c. If the product has been exposed to rain or water.

d. If the product does not operate normally by following the operating instructions.Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.

e. If the product has been dropped or the cabinet has been damaged. f.When the product exhibits a distinct change in performance - this indicates a need for service.

20.Replacement Parts — When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or which have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

21.Safety Check — Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

22.Carts and Stands — The appliance should be used only with a cart or stand that is recommended by the manufacturer.

23.Heat — The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products that produce heat.

GENERAL INFORMATION

Image 2
Contents DRX-1 Important safety instructions General InformationLaser safety FCC Information for US customersSupplied Accessories Read this before operating your unitContents Introduction Cleaning discsRemote control DVD RecorderConnecting to a TV InstallationConnecting to the antenna or Cable TV signal Connections back of your DVD RecorderVideo Cvbs connection Connecting to audio equipmentVideo Y/C connection Digital Multi-channel soundConnecting to a TV with a Dolby Pro Logic decoder Connecting to other equipment optionalConnecting to a receiver equipped with Dolby Pro Logic Connecting to a receiver with two channel analog stereoConnections Front of your DVD Recorder optional Power supplySwitching on Video camera connectionFirst time setup Initial setup Manual settingAutomatic TV Channel Search Functional Overview Functional overviewFront of recorder Back of Recorder Video CvbsDisplay Track time in minutes and secondsMonitor TimerREC Mode SelectDisc types OperationImportant notes for operation Loading discsSystem menu bar On-screen display informationDiscs unsuitable for recording or playing DVD-RAMUser preference menu icons User preference menu operationTemporary feedback icons Disc type icons Status boxTuner info box Disc status iconsTimer info box 1015pmIndex Picture Screen Thu 09 13Sound settings Setting user preferencesPicture settings User preferencesLanguage settings Feature settingsPBC Remote Control settingRecord Settings Add and delete TV channels InstallationUpdate/Re-install TV channel VCR Plus+ chCable/Antenna Time/Date ManuallyPress ENTER/OK Manual recording of a TV channel or from a video camera RecordingBefore you start recording Checking inputSafe Recording RecordingManual audio control Timer programming with the VCR Plus+ system Timer programmingRecording with automatic switch-off OTR One-Touch Recording When using timer recordingTimer programming without the VCR Plus+ SystemIf a timer recording is incorrect Checking or altering a Timer RecordingClearing a timer block How to stop a Timer Recording in progressPlaying a pre-recorded DVD- Video disc PlaybackPlaying a DVD+RW/+R disc Playing a Super Video CDMoving to another chapter/index General featuresMoving to another title/track Still Picture and Frame-by-Frame Playback Slow MotionSearch Scan RepeatRepeat A-B Time searchSpecial DVD+RW/+R features Special DVD-Video featuresCamera Angle Special VCD featuresSubtitles Playback Control PBCMoving to another track Playing an Audio CDPause Repeat track/discChild Lock DVD and VCD Access controlAccess Control Activating/deactivating the child lockLocking Discs that were formerly unlocked Authorizing discs when Child Lock is activatedParental Level DVD-Video only Activating/Deactivating Parental ControlCountry Changing the 4-digit codeDisc Information Screen Managing disc content DVD+RW/+R onlyTitle settings Protection Disc SettingsDisc name Erase discCalling up the Edit menu EditingMake edits DVD-compatible Deleting chapter markers Inserting a chapter markerHiding a chapter Changing the index pictureAppend recording Troubleshooting TroubleshootingBut the titles on the disc still a play period Symptom RemedyIndex Picture Screen does not appear DVD player shows the Index PictureInstructions Diagnosis programDVD Recorder system notes Glossary Term ExplanationAppendix Using your DVD Recorder remote control with your TVPower B/I AppendixRemote control codes for television Samsung , 1005, 1009, 1010 1046, 1063, 1064, 1066Specifications SpecificationsYamaha Corporation