Connecting to other equipment optional

If you cannot connect your DVD Recorder to an A/V receiver with a Multi-channel decoder, choose one of the following alternatives.

Connecting to a receiver equipped with two channel digital stereo (PCM)

●Connect one of the Recorder’s DIGITAL AUDIO OUT jacks to the corresponding IN jack on your receiver. Use the supplied yellow video (CVBS) cable or an optional digital optical audio cable.

●After installation set Digital Output to PCM only (see ‘User preferences.’)

Connecting to a receiver equipped with Dolby Pro Logic

●Make a video connection between the DVD Recorder and the TV.

●Then connect the Recorder’s Left and Right AUDIO OUT jacks to the corresponding inputs on the Dolby Pro Logic Audio/Video receiver, using the audio cable supplied (4).

AMPLIFIER

	EXT 3		EXT 3
	COMPONENT VIDEO	PROG
		SCAN
Y	Y	Y
		L	L
PB	PB	PB	L
PR	PR	PR	R
		R	R

Apparatus Claims of U. S. Patent Nos.				IN
4,631,603, 4,577,216, 4,819,098, and 4,907,093				IN
licensed for limited viewing uses only.		EXT 1	EXT 1/2
	EXT 2	EXT 1	EXT 1/2

●Make the appropriate Sound settings for Analog Output in the user preferences menu.

Connecting to a TV with a Dolby Pro Logic decoder

●Connect the Recorder to the TV as described in chapter ‘Connecting to a TV.’

Connecting to a receiver with two channel analog stereo

●If you have a receiver with only two-channel analog stereo and none of the above mentioned sound systems, connect the Left and Right AUDIO OUT jacks of the DVD Recorder to the corresponding AUDIO IN jacks on your receiver, ampliﬁer or stereo system. Use the audio cable supplied (4).

Step 4: Connecting to other equipment (optional)

To connect other devices to the Recorder, use the available IN jacks on the back of the Recorder.

-Set top box (cable box or satellite receiver) -VCR

-DVD Video player

Most pre-recorded video cassettes and DVD discs are copy protected. If you try to copy them, the

DVD Recorder display will show ‘COPY PROTECT.’

This recorder is not equipped with CBCT or C3 technology to select channels on a set top box automatically.

1								3

		EXT 3		EXT 3
		COMPONENT VIDEO	PROG
			SCAN
	Y	Y	Y
			L	L
	PB	PB	PB	L
	PR	PR	PR	R
Apparatus Claims of U. S. Patent Nos.			R	R
4,631,603, 4,577,216, 4,819,098, and 4,907,093				IN
licensed for limited viewing uses only.	EXT 1			RC 6
EXT 2	EXT 1			EXT 1/2

Set top box

Do not connect a Progressive Scan video source to the COMPONENT VIDEO IN jacks (EXT3).The DVD Recorder cannot record Progressive Scan video signals.

Do not connect the Recorder to a VCR, then connect the VCR directly to the TV. If you are not using the DVD Recorder, turn off its power to avoid interfering with VCR playback.

English

INSTALLATION 5