Yamaha DRX-1 owner manual Manual audio control, Safe Recording

Page 29

Recording

1Press / to open the disc tray.

2Insert a recordable DVD+RW or DVD+R disc.

3Press / to close the disc tray.

4Select the position from which you want to record

using the / .

5Press MONITOR to see TV channels through the DVD Recorder.

6Use CHANNEL 3 and CHANNEL 4 (on the Recorder) or CH+ and CH- (on the remote control) to select the channel you wish to record.

The following channel numbers are provided for recording from external sources that are connected to these jacks on the DVD Recorder:

‘EXT1’ : rear S-Video (Y/C)

‘EXT2’ : rear Video (CVBS)

‘EXT3’ : rear component video (YPBPR)

‘CAM1’ : front S-Video (Y/C)

‘CAM2’ : front Video (CVBS)

‘CAM3’ : front DV.

These channels are located between channels 125 and 1 when choosing TV channels at the Recorder while the Recorder is in monitor mode.

7Press REC.

➤‘RECORD’ shows on the display.

8Press to pause recording.You can resume record- ing by pressing once more.The DVD recorder will make seamless connection.

9Press to stop recording. If you are recording from a video camera watch the video output of the DVD recorder on the TV - instead of the video camera viewer - to determine the right moment to stop.

➤‘MENU UPDATE’ shows on the display.

10The Index Picture Screen appears showing the most recent recording.

Note:

After a short recording on a new disc, a few minutes will be needed to complete the formatting of the disc (‘POST FORMAT’).

Safe Recording

English

pressing REC, a recording on DVD+RW will be made

When you start recording on a DVD+RW disc by briefly

 

from the current position of the disc pointer.To prevent

 

this do the following:

 

●Hold the REC for about two seconds until ‘SAFE RECORD’ appears on the display.

●The recorder automatically jumps to the end of the last title on the disc and starts recording.

➤ If no free space is left.The display will show ‘DISC FULL.’ Safe record is not possible then.

Recordings on DVD+R are always automatically made after the last title on the disc.

Manual audio control

You can control the audio volume recording level of your DVD Recorder manually.

1In monitor mode, press REC VOLUME AUTO/ MAN on the front of the DVD Recorder.

➤ The display will show the current audio level, and ‘MANUAL’ appears.

TITLE

 

CHAPTER

 

 

TIME

REMAIN

 

 

CHANNEL

DVD RW

 

SP

+

 

 

 

 

RECORD

-40

-30

-20

-10

0 OVER

-40

-30

-20

-10

0 OVER

 

 

 

 

MANUAL

 

 

 

 

STEREO

2Adjust the recording level with MANUAL 3 or 4 on the DVD Recorder so that the ‘0 dB’ mark lights up during the loudest parts of the recording.

3Return to automatic audio level control by pressing REC VOLUME AUTO/MAN again.

➤ The display will show the current disc position, and ‘MANUAL’ disappears.

Note:

When recording from the equipment connected to DV, the manual audio control is disabled.The REC VOLUME AUTO/ MAN is active only during monitor mode or while recording.

RECORDING 25

Page 28 Page 30
Image 29
Page 28 Page 30
Contents DRX-1 General Information Important safety instructionsFCC Information for US customers Laser safetyRead this before operating your unit Supplied AccessoriesContents Remote control Cleaning discsIntroduction DVD RecorderConnecting to the antenna or Cable TV signal InstallationConnecting to a TV Connections back of your DVD RecorderVideo Y/C connection Connecting to audio equipmentVideo Cvbs connection Digital Multi-channel soundConnecting to a receiver equipped with Dolby Pro Logic Connecting to other equipment optionalConnecting to a TV with a Dolby Pro Logic decoder Connecting to a receiver with two channel analog stereoSwitching on Power supplyConnections Front of your DVD Recorder optional Video camera connectionManual setting First time setup Initial setupAutomatic TV Channel Search Functional Overview Functional overviewFront of recorder Video Cvbs Back of RecorderTrack time in minutes and seconds DisplayREC Mode TimerMonitor SelectImportant notes for operation OperationDisc types Loading discsDiscs unsuitable for recording or playing On-screen display informationSystem menu bar DVD-RAMUser preference menu icons User preference menu operationTemporary feedback icons Tuner info box Status boxDisc type icons Disc status icons1015pm Timer info boxThu 09 13 Index Picture ScreenPicture settings Setting user preferencesSound settings User preferencesFeature settings Language settingsPBC Remote Control settingRecord Settings Update/Re-install TV channel InstallationAdd and delete TV channels VCR Plus+ chCable/Antenna Time/Date ManuallyPress ENTER/OK Before you start recording RecordingManual recording of a TV channel or from a video camera Checking inputSafe Recording RecordingManual audio control Recording with automatic switch-off OTR One-Touch Recording Timer programmingTimer programming with the VCR Plus+ system When using timer recordingSystem Timer programming without the VCR Plus+Checking or altering a Timer Recording If a timer recording is incorrectHow to stop a Timer Recording in progress Clearing a timer blockPlaying a DVD+RW/+R disc PlaybackPlaying a pre-recorded DVD- Video disc Playing a Super Video CDMoving to another chapter/index General featuresMoving to another title/track Still Picture and Frame-by-Frame Playback Slow MotionSearch Repeat A-B RepeatScan Time searchSpecial DVD-Video features Special DVD+RW/+R featuresSubtitles Special VCD featuresCamera Angle Playback Control PBCPause Playing an Audio CDMoving to another track Repeat track/discAccess Control Access controlChild Lock DVD and VCD Activating/deactivating the child lockParental Level DVD-Video only Authorizing discs when Child Lock is activatedLocking Discs that were formerly unlocked Activating/Deactivating Parental ControlChanging the 4-digit code CountryDisc Information Screen Managing disc content DVD+RW/+R onlyTitle settings Disc name Disc SettingsProtection Erase discCalling up the Edit menu EditingMake edits DVD-compatible Hiding a chapter Inserting a chapter markerDeleting chapter markers Changing the index pictureAppend recording Troubleshooting TroubleshootingIndex Picture Screen does not appear Symptom RemedyBut the titles on the disc still a play period DVD player shows the Index PictureInstructions Diagnosis programDVD Recorder system notes Term Explanation GlossaryPower B/I Using your DVD Recorder remote control with your TVAppendix AppendixSamsung , 1005, 1009, 1010 1046, 1063, 1064, 1066 Remote control codes for televisionSpecifications SpecificationsYamaha Corporation
Top Page Image Contents