RCA 19V400TV manual Antenna Connections, Ohm Coaxial Cable Ohm Matching Transformer

Page 10

ANTENNA CONNECTIONS

If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a cable TV service (CATV), see page 11 for Cable TV connections.

Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire)

Connect the 75 ohm cable from the combination VHF/UHF antenna to the Antenna Jack.

If your combination VHF/UHF antenna has a 300 ohm twin-lead wire, the use of the 300-75 ohm Matching Transformer may be necessary.

Antenna Jack

Antenna Jack

75 ohm Coaxial Cable

300-75 ohm Matching Transformer

Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm twin-lead wires)

Connect the UHF 300 ohm twin-lead wire to the Combiner (not supplied). Connect the VHF 300 ohm twin-lead wire to the 300-75 ohm Matching Transformer. Attach the Transformer to the Combiner, then attach the Combiner to the Antenna Jack.

Antenna Jack

300-75 ohm Matching Transformer

Combiner

UHF 300 ohm

VHF 300 ohm

Separate VHF/UHF Antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)

Connect the VHF 75 ohm cable and UHF 300 ohm twin-lead wire to the Combiner (not supplied). Attach the Combiner to the Antenna Jack.

Antenna Jack

VHF 75 ohm

Combiner

UHF 300 ohm

10

Image 10

Contents TV/VCR Retain Instructions CleaningRead Instructions Heed WarningsPOWER-CORD Protection AccessoriesPower Sources Power LinesSafety Check Damage Requiring ServiceReplacement Parts HeatPrecautions Table of ContentsFeatures Front Rear Location of ControlsDescription of Controls 1019 Remote ControlReset Button Used to reset the counter to 1523Battery Precautions Power SourceBattery Installation Effective Distance of the RE Mote ControlOhm Coaxial Cable Ohm Matching Transformer Antenna ConnectionsCombiner UHF 300 ohm VHF 300 ohm For Subscribers with Scrambled Cable TV Service Setting the LanguageFor Subscribers with Basic Cable TV Service Cable TV ConnectionsAuto Clock Setting VHF/UHF/CATV Channels Manual Clock SettingTV Operation To Select Catv ChannelsCall MutingChannel + SleepTo Memorize Channels Automatic Memory TuningTV/CATV Selection Setting the V-CHIP To ADD/DELETE ChannelsTo SET the V-CHIP To Change PasswordTo use the TV after the TV is protected To SET the on Timer To SET the OFF TimerPicture Control Adjustments Sound Control AdjustmentsPlayback Special Playback ONE-TOUCH Timer Recording OTR Timer RecordingUsing the Real Time Tape Counter Recording Stereo Broadcasts Stereo Recording and PlaybackSecond Audio Program SAP Output SelectionConnection to Another VCR Duplicating a Video TapeConnection to Camcorder No power Troubleshooting GuideSymptom Cause Possible Solution Power TV Broadcast ReceptionRecording Symptom Cause Possible SolutionRemote Control PlaybackVideo Head Cleaning Reception DisturbancesSpecifications TelevisionLimited Warranty If you purchased your product outside the United States 03/12 K