RCA 19V400TV manual Playback

Page 20
AUTO TR.

LOADING AND UNLOADING

Use only video cassette tapes marked .

LOADING

Push the center of the tape until it is automatically retracted into the TV/VCR.

AUTOMATIC POWER ON AND PLAY

When loading a cassette tape without the erase preven- tion tab intact, the TV/VCR will turn on automatically and playback will start immediately.

Insert the cassette with its labeled side facing you. An inverted video cassette cannot be inserted.

UNLOADING

To unload a video cassette, press the

5EJECT button on the remote control, or press the 3/5 (STOP/ EJECT) button on the TV/VCR twice. The first press will stop the tape in any mode. The second press will eject the tape.

AUTOMATIC EJECT

If the TV/VCR automatically rewinds the tape to the beginning (AUTO REWIND FEATURE), the tape will be ejected automatically (See NOTE on page 21).

NOTES: • Always eject the tape when not in use.

The cassette tape can be ejected even if the POWER is “OFF”.

TO PREVENT ACCIDENTAL ERASURE

After recording, break off the erase prevention tab if you do not wish to record over the tape.

Screwdriver

Erase prevention tab

PLAYBACK

To play a prerecorded tape.

TO START PLAYBACK

Load a prerecorded tape (When loading a cassette tape without the erase prevention tab, playback will start automatically).

Press the PLAY button to begin playback.

” will appear on the screen.

NOTE: This TV/VCR selects the playback tape speed SP, LP or SLP automatically.

TO STOP PLAYBACK

Press the STOP button once. The tape will stop, but remain fully loaded and ready to play.

” will appear on the screen.

TO REWIND OR FORWARD THE TAPE RAPIDLY

Press the REVERSE or FORWARD button in the Stop mode.

” or “” will appear on the screen.

FORWARD/REVERSE PICTURE SEARCH

If you want to see the tape during REVERSE or FORWARD mode, press and hold the REVERSE or FORWARD button. The backward or forward visual search picture will be seen on the screen. Release to return to the REVERSE or FORWARD mode.

DIGITAL TRACKING CONTROLS

When a tape is played, the Digital Auto Tracking system automatically adjusts the tracking to obtain the best possible picture. If noise bars

appear during playback, adjust the MANUAL TR.

TO RECORD AGAIN

tracking manually as follows:

+

Cover the hole with adhesive tape.

Be careful the tape does not extend past the edges of the video cassette housing.

Adhesive tape

20

Press the TRK + or – button to obtain the best possible picture. “MANUAL TR.” will appear for 4

seconds on the screen.

To resume automatic tracking, press the AUTO TRACK button.

“AUTO TR.” will appear for 4 seconds on the screen.

TO MONITOR A TV PROGRAM

Press the TV/VCR button while in the playback mode.The video tape will continue to play while the picture switches to the TV channel selected on the TV/VCR. Press the button to return to the playback picture.

Image 20
Contents TV/VCR Cleaning Read InstructionsRetain Instructions Heed WarningsAccessories Power SourcesPOWER-CORD Protection Power LinesDamage Requiring Service Replacement PartsSafety Check HeatPrecautions Table of ContentsFeatures Description of Controls Location of ControlsFront Rear Remote Control Reset Button Used to reset the counter to1019 1523Power Source Battery InstallationBattery Precautions Effective Distance of the RE Mote ControlCombiner UHF 300 ohm VHF 300 ohm Antenna ConnectionsOhm Coaxial Cable Ohm Matching Transformer Setting the Language For Subscribers with Basic Cable TV ServiceFor Subscribers with Scrambled Cable TV Service Cable TV ConnectionsAuto Clock Setting Manual Clock Setting TV OperationVHF/UHF/CATV Channels To Select Catv ChannelsMuting Channel +Call SleepTV/CATV Selection Automatic Memory TuningTo Memorize Channels Setting the V-CHIP To ADD/DELETE ChannelsTo use the TV after the TV is protected To Change PasswordTo SET the V-CHIP To SET the on Timer To SET the OFF TimerPicture Control Adjustments Sound Control AdjustmentsPlayback Special Playback ONE-TOUCH Timer Recording OTR Timer RecordingUsing the Real Time Tape Counter Stereo Recording and Playback Second Audio Program SAPRecording Stereo Broadcasts Output SelectionConnection to Camcorder Duplicating a Video TapeConnection to Another VCR Troubleshooting Guide Symptom Cause Possible Solution PowerNo power TV Broadcast ReceptionSymptom Cause Possible Solution Remote ControlRecording PlaybackVideo Head Cleaning Reception DisturbancesSpecifications TelevisionLimited Warranty If you purchased your product outside the United States 03/12 K