RCA 19V400TV manual Setting the V-CHIP, To ADD/DELETE Channels

〈0–9/+/–/ENTER/MENU〉￿

TO MEMORIZE CHANNELS

TO ADD/DELETE CHANNELS

1	Press the MENU button.		M E N U
2
	Press the SET + or – button to		TIMER REC SET
			TV SET-UP
	select the CH SET-UP mode,		CH SET-UP
			AUTO REPEAT	ON OFF
	then press the ENTER button.		SYSTEM SET-UP
3	Press the SET + or – button to	〈+/–/ENTER/MENU〉
	select the ADD/DELETE mode,		CH SET-UP
	then press the ENTER button.
			TV CATV
4			AUTO CH MEMORY
	Select the desired channel to be		ADD/DELETE
	memorized or deleted using SET
	+ or – button, or using the	〈+/–/ENTER/MENU〉
	Direct Channel Selection
	buttons (10 keys, 0-9), or CH +		ADD	CH 003
	or – button.
5
	Press the ENTER button to

SETTING THE V-CHIP

An age limitation can be set to forbid children to see and hear violent scenes or pictures for adults, etc. The unit corresponds to “TV RATING” and “MOVIE RATING”. To use the V-Chip function, you must register a password.

TO REGISTER PASSWORD

1Press the MENU button in the TV/VCR mode. The TV/VCR menu screen will appear.

2 Press SET + or – to select “TV		M E N U
SET-UP”, then press the ENTER		TIMER REC SET
		TV SET-UP
button.		CH SET-UP
		AUTO REPEAT ON OFF
	￿	SYSTEM SET-UP
	+/–/ENTER/MENU￿

select the ADD or DELETE mode. If you select an unmemorized channel, the Channel indication

will be red. If you select the ADD mode, the Channel indication changes from red to green and the channel will be memorized. If you select a memorized channel, the Channel indication will be green. If you select the DELETE mode, the Channel indication changes from green to red and the channel will be deleted from the memory.

6Press the MENU button until the MENU screen is cleared.

3Press SET + or – to select “V- CHIP SET”, then press the ENTER button.

4Enter the password (4 digits) using Direct Channel Selection button (10key, 0-9), then press the ENTER button.

If you put a wrong number, press the CANCEL button.

TV SET-UP

V-CHIP SET

ON/OFF TIMER

PICTURE

AUDIO

￿ SAP ON OFF

+/–/ENTER/MENU￿

V-CHIP SET

￿NEW

PASSWORD:

0-9/ENTER/CANCEL/MENU￿

“” appears instead of the number.

5Enter the same password again

for the safety, then press the	V-CHIP SET
	￿	CONFIRM
ENTER button.
		PASSWORD:

Now the password is registered
and V-Chip setting menu will	0-9/ENTER/CANCEL/MENU￿
appear on the display.

NOTE:

•If you forget the password...

1Disconnect the AC cord plug from the AC outlet and leave the unit unplugged for more than two minutes.

2Insert the AC cord plug again, and turn the volume level to a minumum.

3Press the VOL – button on the unit and the 0 button on the remote control for more than 2 second simultaneously.

16