RCA 19V400TV manual Power Source, Battery Installation, Battery Precautions

Page 9

BATTERY INSTALLATION

Slide the battery compartment cover.

Install two “AAA” batteries, paying attention to the polarity diagram in the battery compartment.

Replace the compartment cover.

BATTERY PRECAUTIONS

The precautions below should be followed when using batteries in this device:

1.Use only the size and type of batteries specified.

2.Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device.

3.Do not mix different types of batteries together (e.g. Al- kaline and Carbon-zinc) or old batteries with fresh ones.

4.If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

5.Do not try to recharge batteries not intended to be recharged; they can overheat and rupture (Follow battery manufacturer’s directions).

POWER SOURCE

Use the AC polarized line cord provided for operation on AC. Insert the AC cord plug into a standard 120V 60Hz polarized AC outlet.

NOTES:

Never connect the AC line cord plug to anything other than the

specified voltage (120V 60Hz). Use the attached power cord only.

If the polarized AC cord does not fit into a nonpolarized AC outlet, do not attempt to file or cut the blade. It is the user's responsibility to have an electrician replace the obsolete outlet.

If you cause a static discharge when touching the unit, and the unit fails to function, simply unplug the unit from the AC outlet, wait 10 minutes, and plug it back in. The unit should return to

normal operation.

AC Outlet

Wider Hole

and Blade

Polarized AC Cord Plug

(One blade is wider than the other)

EFFECTIVE DISTANCE OF THE RE-

MOTE CONTROL

15 FEET (5m)

30˚ 30˚

NOTES: When there is an obstacle between the TV/ VCR and the remote control, the remote control may not operate.

When direct sunlight, an incandescent lamp, fluorescent lamp or any other strong light shines on the Remote sensor of the TV/ VCR, the remote operation may be unstable.

9

Image 9
Contents TV/VCR Read Instructions CleaningRetain Instructions Heed WarningsPower Sources AccessoriesPOWER-CORD Protection Power LinesReplacement Parts Damage Requiring ServiceSafety Check HeatTable of Contents PrecautionsFeatures Location of Controls Front RearDescription of Controls Reset Button Used to reset the counter to Remote Control1019 1523Battery Installation Power SourceBattery Precautions Effective Distance of the RE Mote ControlAntenna Connections Ohm Coaxial Cable Ohm Matching TransformerCombiner UHF 300 ohm VHF 300 ohm For Subscribers with Basic Cable TV Service Setting the LanguageFor Subscribers with Scrambled Cable TV Service Cable TV ConnectionsAuto Clock Setting TV Operation Manual Clock SettingVHF/UHF/CATV Channels To Select Catv ChannelsChannel + MutingCall SleepAutomatic Memory Tuning To Memorize ChannelsTV/CATV Selection To ADD/DELETE Channels Setting the V-CHIPTo Change Password To SET the V-CHIPTo use the TV after the TV is protected To SET the OFF Timer To SET the on TimerSound Control Adjustments Picture Control AdjustmentsPlayback Special Playback Timer Recording ONE-TOUCH Timer Recording OTRUsing the Real Time Tape Counter Second Audio Program SAP Stereo Recording and PlaybackRecording Stereo Broadcasts Output SelectionDuplicating a Video Tape Connection to Another VCRConnection to Camcorder Symptom Cause Possible Solution Power Troubleshooting GuideNo power TV Broadcast ReceptionRemote Control Symptom Cause Possible SolutionRecording PlaybackReception Disturbances Video Head CleaningTelevision SpecificationsLimited Warranty If you purchased your product outside the United States 03/12 K