RCA 19V400TV manual Muting, Channel +, Call, Sleep, GO Back, Caption

Page 14
SLEEP 120

TV OPERATION

MUTING

Press MUTING button to switch

off the sound. The TV/VCR’sMUTING sound will be silenced and “MUT-

ING” will briefly appear on the screen. The sound can be switched back on by pressing this button again or one of the VOL + or – buttons.

CHANNEL + / –

Press and release the CH + or –

button. The channel automaticallyCH 012 stops at the next channel set

into memory. For proper operation, before selecting channels, they should be set into the memory.

See pages 15 and 16 “To memorize channels”.

CALL

Press the CALL button. The clock, date, channel number, real time tape counter, tape speed and VCR operation will be indicated.

Press CALL button again to disappear the call display.

Current time

 

VCR operation

 

 

 

 

 

 

 

 

 

 

 

: Play

8:47AM THU

CH 012

 

 

Channel No.

 

 

: Reverse

 

 

HI-FI

 

 

 

 

 

 

 

: Forward

 

 

 

 

 

 

 

Auto Repeat

 

 

 

 

 

 

 

 

 

Tape In

 

 

: Eject

 

 

 

 

 

 

 

 

 

 

 

 

 

00:04:38 SP

 

 

: Recording

 

 

 

 

 

 

 

 

 

 

 

 

 

Tape Speed

 

 

: Pause

 

 

Real Time Counter

 

 

 

: Stop

HI-FI stereo

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTE: To listen through the headphones, insert a headphones (not supplied) with a 1/8" mini plug into PHONES jack on the front. The sound from the TV speaker is muted.

SLEEP

To set the TV/VCR to turn off after a preset amount of time, press the SLEEP button on the remote control. The clock will count down 10 minutes for each press of the SLEEP button (120, 110, ...10, 0). After the sleep time is programmed, the display will appear briefly every ten minutes to remind you that the sleep timer is operating. To confirm the sleep timer setting,

press the SLEEP button and the remaining time will be momentarily displayed. To cancel the sleep timer, press the SLEEP button repeatedly until the display turns to 0.

GO BACK

This button allows you to go back

to the last channel selected byCH 012 pressing the GO BACK button.

Press this button again to return to the last channel you were watch- ing.

CAPTION

Press CAPTION button to switch between normal TV and the two closed caption modes (captions and screen text). Closed captioning will

display text on the screen forCAPTION CH 1 hearing impaired viewers.

NOTES: If using an indoor antenna or if TV reception is very poor, the Closed Caption Decoder text may not appear. In this case, adjust the antenna for better reception or use an outdoor antenna.

When activating the Closed Captioned Decoder, there will be a short delay before the Closed Captioned text appears on the screen.

Closed Captioned text is only displayed in locations where it is available.

If the Call display is on, the Closed Captioning text will not appear.

WHAT IS CLOSED CAPTIONING?

This television has the capability to decode and display Closed Captioned television programs. Closed Captioning will display text on the screen for hearing impaired viewers or it will translate and display text in another language.

CLOSED CAPTIONING WITH A VCR

Closed Captioned programs can be recorded and played back on a VCR with the Closed Captioned text intact. The Closed Captioned text will disappear during Cue (Fast Forward Search), Review (Rewind Search) and Pause Modes or if the VCR tracking is not adjusted properly.

TO VIEW CLOSED CAPTIONS

Press the CAPTION button on the remote control to switch between normal TV and the two Closed Caption Modes (Captions and Screen Text).

14

Image 14
Contents TV/VCR Retain Instructions CleaningRead Instructions Heed WarningsPOWER-CORD Protection AccessoriesPower Sources Power LinesSafety Check Damage Requiring ServiceReplacement Parts HeatPrecautions Table of ContentsFeatures Description of Controls Location of ControlsFront Rear 1019 Remote ControlReset Button Used to reset the counter to 1523Battery Precautions Power SourceBattery Installation Effective Distance of the RE Mote ControlCombiner UHF 300 ohm VHF 300 ohm Antenna ConnectionsOhm Coaxial Cable Ohm Matching Transformer For Subscribers with Scrambled Cable TV Service Setting the LanguageFor Subscribers with Basic Cable TV Service Cable TV ConnectionsAuto Clock Setting VHF/UHF/CATV Channels Manual Clock SettingTV Operation To Select Catv ChannelsCall MutingChannel + SleepTV/CATV Selection Automatic Memory TuningTo Memorize Channels Setting the V-CHIP To ADD/DELETE ChannelsTo use the TV after the TV is protected To Change PasswordTo SET the V-CHIP To SET the on Timer To SET the OFF TimerPicture Control Adjustments Sound Control AdjustmentsPlayback Special Playback ONE-TOUCH Timer Recording OTR Timer RecordingUsing the Real Time Tape Counter Recording Stereo Broadcasts Stereo Recording and PlaybackSecond Audio Program SAP Output SelectionConnection to Camcorder Duplicating a Video TapeConnection to Another VCR No power Troubleshooting GuideSymptom Cause Possible Solution Power TV Broadcast ReceptionRecording Symptom Cause Possible SolutionRemote Control PlaybackVideo Head Cleaning Reception DisturbancesSpecifications TelevisionLimited Warranty If you purchased your product outside the United States 03/12 K