RCA 19V400TV manual Duplicating a Video Tape, Connection to Another VCR, Connection to Camcorder

Page 25

DUPLICATING A VIDEO TAPE

If you connect the TV/VCR to another VCR or Camcorder, you can duplicate a previously recorded tape. Make all connections before turning on the power.

1Insert a blank cassette with the erase prevention tab intact into the TV/VCR.

Insert a previously recorded cassette into the play back VCR or Camcorder.

2Press the INPUT button

CONNECTION TO ANOTHER VCR

Recording TV/VCR

Playback VCR

twice to select AUDIO/VIDEO input position. The “LINE 2” will appear on the screen.

LINE 2

To VIDEO

To AUDIO

 

OUT

OUT

To Audio In

 

To Video In

 

Audio/Video Cord (not supplied)

 

NOTE: You can also use the rear AUDIO/VIDEO LINE1 Jacks. Select “LINE 1” by pressing the INPUT button.

3Press the REC/OTR button on the remote control of the TV/VCR, then press the PAUSE button.

4Press the PLAY button on the playback VCR, then press the PAUSE/STILL button.

5Release the recording pause and the playback still simultaneously to begin the duplicating process.

NOTES: • It is recommended that the tape speed be set to the SP mode on the TV/VCR for best result.

•Unauthorized recording of copyrighted television programs, films, video cassettes and other materials may infringe the rights of copyright owners and be contrary to copy right laws.

CONNECTION TO CAMCORDER

For duplicating a previously recorded tape from a camcorder, follow the camcorder manufacturer’s instruc- tions. A typical camcorder dubbing hookup is shown below.

Recording TV/VCR

Playback

Camcorder

To AV Jack

To Video/Audio In

Audio/Video Cord (not supplied)

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents TV/VCR Read Instructions CleaningRetain Instructions Heed WarningsPower Sources AccessoriesPOWER-CORD Protection Power LinesReplacement Parts Damage Requiring ServiceSafety Check HeatTable of Contents PrecautionsFeatures Front Rear Location of ControlsDescription of Controls Reset Button Used to reset the counter to Remote Control1019 1523Battery Installation Power SourceBattery Precautions Effective Distance of the RE Mote ControlOhm Coaxial Cable Ohm Matching Transformer Antenna ConnectionsCombiner UHF 300 ohm VHF 300 ohm For Subscribers with Basic Cable TV Service Setting the LanguageFor Subscribers with Scrambled Cable TV Service Cable TV ConnectionsAuto Clock Setting TV Operation Manual Clock SettingVHF/UHF/CATV Channels To Select Catv ChannelsChannel + MutingCall SleepTo Memorize Channels Automatic Memory TuningTV/CATV Selection To ADD/DELETE Channels Setting the V-CHIPTo SET the V-CHIP To Change PasswordTo use the TV after the TV is protected To SET the OFF Timer To SET the on TimerSound Control Adjustments Picture Control AdjustmentsPlayback Special Playback Timer Recording ONE-TOUCH Timer Recording OTRUsing the Real Time Tape Counter Second Audio Program SAP Stereo Recording and PlaybackRecording Stereo Broadcasts Output SelectionConnection to Another VCR Duplicating a Video TapeConnection to Camcorder Symptom Cause Possible Solution Power Troubleshooting GuideNo power TV Broadcast ReceptionRemote Control Symptom Cause Possible SolutionRecording PlaybackReception Disturbances Video Head CleaningTelevision SpecificationsLimited Warranty If you purchased your product outside the United States 03/12 K
Top Page Image Contents