Insignia NS-R27TR manual Marking a playback starting point, Searching with index markers

						Insignia NS-R27TR 27" Round Tube TV/DVD/VCR Combo
Marking a playback starting point						3	Press the	or		button one or more times
	You can mark a beginning point on a videotape						to select the amount of playback time you
							want to skip. You can select as much as
	where you want playback to start.
							9 hours and 50 minutes in 10 minute
							increments.
		Note
		This feature does not work with blank videotapes
		or blank sections of a videotape.					Note
							To cancel the search and close the menu at this
	To mark a playback starting point:						point, press the SETUP button.
	1 Rewind or forward the videotape to the point					4	Press the	or	button to rewind or forward
		where you want playback to start.					the videotape to the specified point. The time
	2 Press the CLEAR button one or more times						counts down during the search. When the
		until the counter is set to 0:00:00.					counter reaches 0:00:00, playback starts
	3 Press the PLAY		button to start playback or				automatically.
						5 To cancel the search, press the STOP
		the REC button to start recording.
	4 Press the STOP			button when playback or			button on the remote control or
							STOP/EJECT			button on the front of your
		recording is complete.					TV combo.
	5 Press the SETUP button.
						Searching with index markers
	6 Press the or			button to select ZERO
		RETURN, then press the ENTER button. The				Every time you start recording, your TV combo
		videotape begins rewinding and stops when				adds an index marker to the videotape. If you
		the counter reaches 0:00:00.				record on a videotape, then stop recording,
	7 To cancel rewinding, press the STOP					when you start recording again, another index
						marker is added to the tape.You can use the
		button.
						index markers to find the start of a recording.
Searching forward or backward
							Note
	To search forward or backward on a						• If you pause the videotape during a recording,
	videotape:						no index marker is added.
							• In some cases, an index marker at the
	1 During playback, press the SKIP/REW
							beginning of a tape cannot be detected.
		button to search backward on a videotape.					• For recordings in SP mode, the time gap
		Press the FWD/SKIP			button to search		between index markers must be at least one
		forward on a videotape. When you are					minute.
		searching, the sound is muted.					• For recordings in LP mode, the time gap
	2 Press the SKIP/REW				or FWD/SKIP		between index markers must be at least two
							minutes.
		button to search at high speed (LP and SLP					• For recordings in SLP mode, the time gap
		modes only).					between index markers must be at least three
							minutes.

Note

Videotapes recorded in SP or LP mode normally display a noise bar during high speed searching and the picture may be black and white.

3Press the PLAY button to resume normal playback.

Searching by specifying a time

You can search on a videotape by entering the amount of time you want to skip before playback begins.

To search by specifying a time:

1Press the SETUP button.

2Press the or button to select TIME SEARCH, then press the ENTER button.

To search with index markers:

1Press the SETUP button.

2Press the or button to select INDEX SEARCH, then press the ENTER button.

3Press the or button one or more times to select the number of programs you want to skip.

4 Press the or button. Your TV combo rewinds or fast-forwards through the number of programs you specified, then starts playback automatically.

5To cancel the index search, press the STOP button on the remote control or

STOP/EJECT button on the front of your TV combo.

Selecting a tape speed for recording

You can record a videotape in one of two speeds: SP (standard play) and SLP (super long play).

Speed	T60 tape	T120 tape	T160 tape
SL	1 hour	2 hours	2-2/3 hours
SLP	3 hours	6 hours	8 hours

18 www.insignia-products.com