Insignia NS-R27TR manual Changing a scheduled recording, Canceling a scheduled recording

Insignia NS-R27TR 27" Round Tube TV/DVD/VCR Combo

13Press the POWER button to turn off your TV combo. The recording indicator light turns on. (You must turn off your TV combo to activate the automatic timer recording.) When the recording start time comes, your TV combo starts recording without turning on the TV screen.

5Press the REC button one or more times to select the beginning and ending time for the recording. Each time you press the button, the time shifts forward by 10 minutes.

6Press the ENTER button.

7Press the SETUP button to close the menu.

Note

•If you do not turn off your TV combo, “TIMER REC STANDBY” starts flashing on the screen two minutes before recording start time.

•During the recording you can only watch the channel that is being recorded or a DVD.

•If the videotape runs out before the recording is complete, your TV combo stops recording, ejects the tape, and turns off.

To check a scheduled recording:

1Turn on your TV combo.

2Press the SETUP button.

3Press the or button to select TIMER PROGRAMMING, then press the ENTER button. The scheduled recordings appear on the screen.

4Press the SETUP button to close the menu.

Changing a scheduled recording

To change a scheduled recording:

1Press the SETUP button.

2Press the or button to select TIMER PROGRAMMING, then press the ENTER button.

3Press the or button to select the program, then press the button.

4 Press the or button to select the field you want to change (the field will flash).

5Press the or button to change the field, then press the ENTER button.

Canceling a scheduled recording

To cancel a scheduled recording:

1Turn on your TV combo.

2Press the SETUP button.

3Press the or button to select TIMER PROGRAMMING, then press the ENTER button. The scheduled recordings appear on the screen.

4Press the or button to select the program you want to cancel, then press the CLEAR button.

5Press the SETUP button to close the menu.

Extending the time for a scheduled recording

1Turn on your TV combo.

2Press the SETUP button.

3Press the or button to select TIMER PROGRAMMING, then press the ENTER button. The scheduled recordings appear on the screen.

4Press the REC button, then press the or

button to select the program you want.

Using AUTO RETURN

After scheduled recordings are finished, you can search through the beginnings of the recordings on the videotape.

To use AUTO RETURN:

1Press the SETUP button.

2Press the or button to select USER’S SET UP, then press the ENTER button.

3Press the or button to select AUTO RETURN, then press the ENTER button to select ON. When the scheduled recordings are complete, the videotape rewinds to the beginning of the recorded programs, then your TV combo turns off.

To cancel AUTO RETURN:

1Press the SETUP button.

2Press the or button to select USER’S SET UP, then press the ENTER button.

3Press the or button to select AUTO RETURN, then press the ENTER button to select OFF.

Copying a videotape

Caution

Unauthorized recordings of copyrighted videotapes may be an infringement of copyright laws.

Note

You cannot copy a DVD.

To copy a videotape:

1Use the following illustration to connect an external video device, such as a VCR or camcorder, to your TV combo.

TV combo front A/V

input jacks

HEADPHONE VIDEO L - AUDIO - R

External device A/V output jacks

AUDIO

L

OUT IN

R

VIDEO

OUT IN

2Insert the videotape you want to copy into the external video device.

3Insert the videotape you want to record on into the videotape compartment on your TV combo.

www.insignia-products.com 21