Insignia NS-R27TR Checking the DVD status, Checking the audio CD status, Creating a CD playlist

Insignia NS-R27TR 27" Round Tube TV/DVD/VCR Combo

•If you turn off your TV combo after

pressing the STOP button once, your TV combo remembers where you stopped and resumes playing at that point where you stopped.

•To completely stop playback, press the STOP button twice. If you press the

PLAY button, playback starts at the beginning of the disc.

•To fast-reverse or fast-forward the disc,

press the SKIP/REW or

FWD/SKIP button. Each time you press and hold one of these buttons, the reverse or forward speed increases. For DVDs, the fast-reverse and fast-forward speed varies depending on the DVD. Approximate speeds are 1 (×2), 2 (×8), 3 (×20), 4 (×50), and 5 (×100). For Audio CDs, the approximate speeds are 1 (×2),

2 (×8), and 3 (×30). Press the PLAY button to resume normal playback.

•To slow-reverse or slow-forward a DVD, press the PAUSE•SLOW button, then

press and hold the SKIP/REW or

FWD/SKIP button. Each time you press and hold one of these buttons, the reverse or forward speed decreases. Approximate speeds are 1 (1/16), 2 (1/8), and 3 (1/2).

Note

If a circle with a line through it appears in the top right corner of the screen when you try to use a feature, that feature is not available at the time.

Checking the DVD status

You can view status information about the currently playing DVD.

To view the DVD status:

•Press the DISPLAY button once to see the elapsed and remaining playing time for the current chapter.

•Press the DISPLAY button again to see the elapsed and remaining playing time for the current title.

•Press the DISPLAY button again to see the current bit-rate and repeat setting. If you are playing a dual-layered DVD, the layer number also appears (L0 means layer 0 is playing. L1 means layer 1 is playing).

•Press the DISPLAY button again to turn off the status display.

Checking the audio CD status

You can view status information about the currently playing audio CD.

To view the audio CD status:

•Press the DISPLAY button once to see the elapsed and remaining playing time for the current track.

•Press the DISPLAY button again to see the elapsed and remaining playing time for the entire CD.

•Press the DISPLAY button again to turn off the status display.

Using the DVD Disc menu and Title menu

Some DVDs have Disc and Title menus. If the DVD you are playing has one of these menus, you can access this menu during playback.

To use a DVD Disc or Title menu:

1Press the DISC/MENU or TITLE button. If the DVD has a Disc or Title menu, the menu opens.

2Press the , , , or , button to select an option, then press the ENTER button.

Note

•If the DVD has a Disc menu, audio language, subtitle options, chapters for the title, and other options appear on this menu.

•Menu options available on DVDs vary.

Repeating a title, chapter or track

To repeat a DVD title or chapter or an audio CD track:

1During playback, press the MODE button one or more times until REPEAT appears.

2Press the or button to select a repeat mode. You can select:

•For DVDs–OFF, CHAPTER, TITLE

•For CDs–OFF, TRACK, ALL

Note

When you change to a different title, chapter, or track, the repeat function turns off.

3Press the RETURN button to close the menu.

Creating a DVD or audio CD playback loop

To create a playback loop:

1During playback, press the MODE button one or more times until A-B REPEAT appears.

2When the disc reaches the starting point you want, press the ENTER button. To cancel the starting point, press the CLEAR button.

3When the disc reaches the ending point you want, press the ENTER button. The playback loop you created starts playing.

4To cancel the loop, press the MODE button one or more times until A-B REPEAT appears on the screen, then press the ENTER button one or more times until OFF appears. Press the RETURN button to close the menu.

Note

•You can only create a playback loop for the current DVD title or CD track.

•You cannot create a playback loop with some scenes in DVDs.

•You cannot create a playback loop if another repeat function is currently active.

Creating a CD playlist

You can create a CD playlist that lets you play the tracks on a CD in any order.

To create an audio CD playlist:

1Turn on your TV combo, then insert a CD.

2If CD starts playing, press the STOP button.

24 www.insignia-products.com