Magnavox MDV560VR/17 DVD and Video CD Operation, Playing DVDs and Video CD, General Features

DVD and Video CD Operation

Playing DVDs and Video CD

Playback Setup DVD VCD2.0 VCD1.1

∀Turn on the TV and select the video input source con- nected to the DVD+VCR.

∀Audio system: Turn on the audio system and select the input source connected to the DVD+VCR.

∀Set the Output Source to DVD as shown in “Selecting the Viewing Source” on page 6.

1 Press OPEN/CLOSE (Z) to open the disc tray.

2 Load your chosen disc in the tray, with the label facing up.

When a double-sided DVD is inserted, make sure the side you want to play is facing down.

3 Press OPEN/CLOSE (Z) to close the tray. Playback starts automatically. If playback does not start, press PLAY (N). In some cases, the disc menu might appear instead.

If a menu screen is displayed

The menu screen may be displayed first after loading a DVD or Video CD which contains a menu.

DVD

Use b/B/v/V buttons to select the title/chapter you want to view, then press OK to start playback.

Press TITLE or DISC MENU to return to the menu screen.

VCD2.0

∀Use the number buttons to select the track you want to view. Press RETURN to return to the menu screen.

∀Menu setting and the exact operating procedures for using the menu may differ depending on the disc. Follow the instructions on the each menu screen.

You also may set PBC to Off under setup (see page 19).

Notes

∀If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit password must be entered and/or the disc must be authorized (see “Parental Control”, on page 20).

∀DVDs may have a Region Code.

Your DVD+VCR will not play discs that have a Region Code different from your DVD+VCR. The Region Code for this DVD+VCR is 1 (one).

∀Do not keep a fixed image displayed on the screen for a long time.

Operation 27

General Features

Note

Unless stated otherwise, all operations described use the remote control. Some features may also be available on the Setup menu.

Moving to another TITLE DVD 1 /3

When a disc has more than one title, you can move to another title as follows:

∀Press DISPLAY, then press the appropriate number but- ton (0-9) to select desired title number.

Moving to another CHAPTER/TRACK

DVD VCD2.0 VCD1.1 1 /12 1 /3

When a title on a disc has more than one chapter or a disc has more than one track, you can move to another chapter/track as follows:

∀Press . or > briefly during playback to return to the beginning of the current chapter/track or to select the next chapter/track.

∀Press . twice briefly to step back to the previous chapter/track.

∀To go directly to any chapter/track during playback, press DISPLAY. Use v/V to select Chapter/track icon. Then, enter the chapter/track number with the number buttons (0-9).

Slow Motion DVD VCD2.0 VCD1.1

1Press PAUSE/STEP (X) during playback. The DVD+VCR will go into PAUSE mode.

2Press . or > during pause mode.

The DVD+VCR will enter SLOW mode.

3Use . or > to select the required speed: t 1/16, t 1/8, t 1/4, t 1/2 (backward), or T 1/16, T 1/8, T 1/4, T 1/2 (forward).

With a Video CD, the Slow motion speed changes: T 1/16, T 1/8, T 1/4 (forward only).

4To return to playback, press PLAY (N).

Note

Slow motion playback in reverse is not applicable for Video CD.

English