Avaya S8500 manual Installing Avaya Communication Manager

Installing Avaya Communication Manager

Installing Avaya Communication Manager

Use a Telnet session to access the information on the CD-ROM.

1.On your Services laptop computer, click Start > Run to open the Run dialog box.

2.Type telnet 192.11.13.6 and press Enter to view the first screen.

Note:

To navigate on these screens, use the arrow keys to move to an option, and then press the spacebar to select the option. Press Enter to submit the information on the screen.

3.Select Install, ensure that <OK> is highlighted, and press Enter.

4.On the Select Release Version screen, ensure that the Build line and <OK> are highlighted. Press Enter to partition the hard disk drive and reformat the partitions.

Once the drive is properly configured, the program starts the installation process and reports the progress.

These processes can take up to 20 minutes to complete.

5.You must remove the CD-ROM from the drive at this time. When the media server is ready to reboot, the drawer of the CD-ROM drive opens.

The reboot can take up to 3 minutes. The Telnet session drops automatically when the reboot starts.

6.Perform one of the following actions:

●If you are installing the S8500 Media Server as a call controller, continue with the next section of this document.

●If your are installing the S8500 as an LSP, continue with Chapter 7: Install an S8500 Media Server as an LSP on page 63.

Installing and Configuring the Avaya S8500 Media Server February 2007 37