Avaya S8500 manual How to use Avaya installation documents

Page 8

Chapter 1: Introduction

How to use Avaya installation documents

Use this document as a guide to install and configure Avaya media servers. For information about a particular task, use the index or the table of contents to locate the page on which the information is described. You also need information from other Avaya documents. This section lists those documents and tells you when to use them.

To complete this installation:

●In this document, see:

-Pre-installation requirements on page 9 first. This section describes the tasks that your must complete at the site before you start the installation.

-Equipment specifications on page 13 for the technical specifications for the hardware.

●For how to install and connect the hardware, see Quick Start for Hardware Installation: Avaya S8500 Media Server (555-245-701).

●For how to install an updated version of the Avaya Server Availability Management Processor (SAMP) and configure the SAMP, see Using the Avaya Server Availability Management Processor (03-300322).

●Return to this document and see the remaining sections in the following sequence to install the components of the media server. If you are not to install certain components, skip the procedures for those components.

-Configuring the SNMP modules in the UPS on page 27

-Configuring the SNMP subagent in the Avaya Ethernet switch (if used) on page 30

-Media server configuration on page 39

-Configuring the NIC on page 46

-IP interface translations on page 49

! Important:

If the S8500 Media Server is configured as an LSP, skip the following section.

●See the appropriate sections in the following documents to install the port networks and the media gateways:

-Installing the Avaya G650 Media Gateway (03-300144)

-Installation and Configuration for the Avaya G150 Media Gateway (03-300395

-Quick Start for Hardware Installation: Avaya G250 Media Gateway (03-300433)

-Quick Start for Hardware Installation: Avaya G350 Media Gateway (03-300148)

-Installation of the Avaya G350 Media Gateway (555-245-104)

-Quick Start for Hardware Installation: Avaya S8300 Media Server and Avaya G700 Media Gateway (555-233-150)

8 Installing and Configuring the Avaya S8500 Media Server

February 2007

Image 8

Contents Installing and Configuring the Avaya S8500 Media Server ReleaseAvaya Inc All Rights Reserved Introduction Media server configuration Install an S8500 Media Server as an LSP Index 101 Introduction AudienceHow to use Avaya installation documents Verifying that all the required equipment is on site Pre-installation requirementsPreinstallation tasks to complete at the customer site Ensuring that the preinstallation tasks are complete S8500 hardwareS8500C front panel S8500B front panel Equipment specifications UPSS8500 Media Server specifications Feature S8500B S8500C CD-ROM/DVD-ROM IDEAcoustical About Samp connections About the Server Availability Management ProcessorAbout Samp functionality Samp connections for S8500B About Samp software Samp connections for S8500CAbout media server port connections S8500 port connectionsS8500C Media Server connectivity guide About modem connections Modem connectivity on the S8500 Media ServerModem options About media gatewaysAbout Processor Ethernet About Processor Ethernet About S8500 LSP mode S8500 LSP license file About SSHTN8412AP Sipi Snmp Configuration Configuring the Snmp modules in the UPSDefault IP addresses for the UPS Prerequisites for configuring the Snmp moduleAdministering the Snmp module Security AlertSetting selected traps alarming Default IP addresses for the Ethernet switch Preparing to configure the Ethernet switchConfiguring the Ethernet switch Page Page Communication Manager installation Clearing the ARP cache on the laptopConfiguring Telnet for Windows 2000 and Windows XP Applying power to the media serverAccessing the media server Installing Avaya Communication Manager Communication Manager installation Media server configuration Opening the Maintenance Web Interface Creating a super-user loginUnder Security, select Administrator Accounts Type susers in the login group fieldAbout the Avaya Installation Wizard Running the Avaya Installation Wizard Installing Samp firmwareType sampcmd samp-update status and press Enter Verifying the RMB IP informationConfiguring the modem Click Execute PingEnabling firewall settings Select Configure individual services and click ContinueSelect Change Modem Setting and click Continue Enabling network time serversEnabling network time servers Configuring the NIC Checking LED activity on the dual NICConfiguring the NIC Disconnecting from the media server Click ContinueIP interface translations Inputting initial system translationsAdding media gateways Cabinet Cabinet DescriptionSet the Ipsi Control of Port Networks field to enabled Enabling the IpsiSetting the alarm activation level Adding the Ipsi to the systemSaving translations Type add ipserver-interface PNnumber and press EnterIP interface configuration Connecting to the IPSIsIpsi address configuration Programming the Ipsi for static addressingConnecting the laptop directly to the Ipsi Type show control interface and press Enter Setting the Vlan and diffserv parameters Ipsi LED display for static address Programming the Ipsi for Dhcp addressing CLKIP interface configuration Verifying connectivity to the media server CLKVerifying that the IPSIs are translated Upgrading the Ipsi firmware version if necessaryEnabling control of the IPSIs Verifying the license statusInstall an S8500 Media Server as an LSP Configuring the media server as an LSPSelect This is a local survivable processor LSP Select the Configure Individual ServicesSelect Set Identities Administering the primary controller Enabling license server capability on a media gatewayInstalling and verifying the license on the new LSP Type stop -caf Type start -cafOpening the TCP ports on the S8500 LSP Resetting the S8500 LSPClick Advanced Setting Readministering media gateways to point to the LSP Verifying that the primary controller identifies the new LSPList station List trunk-group List hunt-group Postinstallation administrationVerifying translations Setting rules for daylight savings time Type change daylight-savings-rules and press EnterSetting locations if necessary Type change locations and press EnterClearing and resolving alarms Verifying the date and the timeEnabling and disabling the Ethernet switch ports Click Submit Changes Enabling alarms to Inads by way of a modem Backing up files to the compact flash mediaEnabling alarms to Inads by way of the Snmp module Before leaving the siteTesting the license file Installation verificationTesting the Ipsi circuit pack S8500 LEDs S8500 front-panel LEDs DescriptionAdditional media server LED information Rear view of S8500B Media ServerAvaya C360 Ethernet switch LEDs LAGLEDs on the Powerware 9125 UPS UPS LEDsTN2312BP Ipsi LEDs TN2312BP Ipsi circuit pack faceplate Ipsi LED display for a static IP address Connectivity status Appendix a Media server access Accessing the command line interface of the server withBackspace key area, select Control-H Connecting to the media server directly Cadlsrv3 KLC Connecting to the media server remotely over the network Connecting to the media server remotely over a modemAccessing the Maintenance Web Interface Click Launch Maintenance Web InterfaceType of connection Procedure Using the SAT command line promptLogins for Avaya technicians and BusinessPartners Subnet mask Configuring the network for Windows 2000 and XPSelect Internet Protocol TCP/IP Setting the browser options for Internet Explorer Click on LAN settings, then AdvancedPage Appendix B Installation troubleshooting Problem Possible solutionPing 192.11.13.6 and press Enter Dhcp Press EnterProblem Possible solution Index Directly Remotely over modem Remotely over networkIpsi Enabling Setting version

Related manuals

Manual 72 pages 24.67 Kb