SUPER MICRO Computer 6014L-M manual Remote Access Configuration, MPS Configuration

Page 80

SUPERSERVER 6014L-M User's Manual

￿MPS Configuration

This section allows the user to confi gure the multiprocessors table.

MPS Revision

This feature allows the user to select the MPS revision. Please follow the instruc- tions given on the screen to select the MPS revision number. The options are 1.1 and 1.4.

￿PCI Express Configuration

This section allows the user to confi gure the PCI Express slots.

Active State Power Management

Select Enabled to activate the function of power management for signal transac- tions between the PCI Express L0 and L1 Links. The options are Enabled and Disabled.

I/O Expander Mode

This feature allows the user to set the IO Expand Mode for Hot Plug support. The options are PCA9555, Two PCA9554, One PCA9554 (Low), One PCA9554 (High), Two PCA9554A, One PCA9554A (Low), and Two PCA9554.

PCI Express PortA (Slot4)/PCI Express PortB (Slot6)/PCI Express PortC0

(NIC1)/PCI Express PortC1 (NIC2)

This feature allows the user to confi gure the PCI Express slot specifi ed. If set to Auto, the slots with IO cards installed will be visible. If Enabled, the IO slots will always be displayed. If set to Disabled, the IO slots will not displayed. The options are Auto, Enabled, and Disabled.

PCI Express Compliance Mode

Select Enabled to enable MCH to activate the PCI Express Compliance Mode. The options are Disabled and Enabled.

Spread Spectrum

Select Enabled to enable the function of Spread Spectrum and allows the BIOS to monitor the level of electromagnetic interference caused by the components installed in the system and to attempt to reduce the electromagnetic interference when needed. The options are Disabled and Enabled.

￿Remote Access Configuration

You can use this screen to select options for the Remote Access Confi guration. Use the up and down arrow keys to select an item. Use the <+> and <-> keys to change the value of the selected option.

7-12

Image 80
Contents Super Manual Revision Release Date February 23 Manual Organization PrefaceAbout This Manual System Safety Advanced Serverboard SetupAdvanced Chassis Setup BiosPreface Table of Contents System Safety Advanced Serverboard SetupAdvanced Chassis Setup Bios AppendicesPage Chapter Introduction OverviewServerboard Features Processors MemorySerial ATA PCI Expansion SlotsOther Features Onboard Controllers/PortsIntel E7520 Chipset System Block Diagram Server Chassis Features Contacting Supermicro HeadquartersEurope Asia-PacificUnpacking the System Chapter Server InstallationPreparing for Setup Server Precautions Choosing a Setup LocationRack Precautions Rack Mounting Considerations Rack hardware optional Installing the System into a RackBasic Installation Procedure Installing with Rackmount Kit Installing the Chassis RailsInstalling the Rack Rails Installing the Server into the RackInstalling the Server into a Telco Rack Installing the Server into a Rack Optional Rackmount KitChecking the Serverboard Setup Accessing the inside of the server FigureCheck the system memory Installing add-on cards Check all cable connections and airflowChecking the Drive Bay Setup Page Chapter System Interface Control Panel ButtonsControl Panel LEDs Page Page Chapter System Safety Electrical Safety PrecautionsGeneral Safety Precautions ESD Precautions Operating Precautions Installing the Onboard BatteryChapter Advanced Serverboard Setup PrecautionsHandling the Serverboard UnpackingInstalling the Serverboard Serverboard InstallationInstalling the Heatsink Brackets Processor and Heatsink Installation Installing the ProcessorsInstalled heatsink Installing the HeatsinksInstalled processor Removing the Heatsink Connecting Power Cables Connecting CablesConnecting Data Cables Connecting the Control Panel I/O PortsMemory Support Installing MemoryDimm Installation See Figure PCI slots PCI card installationAdding PCI Cards Serverboard Details Super X6DLP-EG2 LayoutJumper Description Default Setting Connector DescriptionOnboard Indicators Description X6DLP-EG2 Quick ReferenceConnector Definitions ATX Power ConnectorProcessor Power Connector Power LEDOverheat/Fan Fail LED Power Fail LEDNIC1/2 LEDs Reset Button Power ButtonJLAN1/2 Ethernet Ports Chassis IntrusionFan Headers Universal Serial Bus USB0/1Universal Serial Bus Headers Wake-On-LAN Speaker/Power LED/KeylockWake-On-Ring Connector Power FaultSMB Power I2 C ATX PS/2 Keyboard and PS/2 Mouse PortsJumper Settings JLAN1/2 Enable/DisableExplanation Jumpers Cmos ClearVGA Enable/Disable Power Force OnSMBus to PCI Slots Watch DogOnboard Indicators Alarm ResetJlan LEDs System Status LEDOnboard LED Indicators DS1, DS5 Onboard LED Indicators DS7, DS8Parallel Port, Floppy, IDE and Sata Drive Connections Parallel Printer Port HeaderFloppy Connector Sata ConnectorsIDE Connectors IDE Drive Connectors Pin Definitions IDE1, IDE2Chapter Advanced Chassis Setup PrecautionsStatic-Sensitive Devices Tools RequiredControl Panel System FansInstalling a new fan System Fan FailureReplacing System Cooling Fans Removing a fanSerial ATA Drive Installation Drive Bay Installation/RemovalAccessing the Drive Bays CD-ROM Drive Installation Power Supply Power Supply FailureReplacing the Power Supply Accessing the inside of the systemRemoving the power supply Installing a new power supplyPage Introduction How To Change the Configuration DataChapter System Memory Main SetupProcessors Advanced Settings Configure Advanced CPU SettingsCPU Configuration Sub-Menu System Time/System DateCombined Mode Operation IDE Configuration Sub-MenuIDE Configuration ATA Ports DefinitionLBA/Large Mode TypeBlock Multi-Sector Transfer A.R.T. For Hard disk drivesFloppy Configuration PCI/PnP ConfigurationAllocate IRQ to PCI VGA Palette SnoopingPCI IDE BusMaster Offboard PCI/ISA IDE CardSuper IO Configuration Sub-Menu Advanced Chipset Settings Power Configuration Apci ConfigurationWatch Dog Timer PCI/PCI Error LoggingPCI/PCI Express Error Logging Event Log ConfigurationPCI Express Configuration Remote Access ConfigurationMPS Configuration Remote Access Serial Port ModeRedirection After Bios Post Sredir Memory Display DelayUSB Configuration System Health MonitorBoot Settings System Fan MonitorFan Speed Control Modes Fan1 Speed to Fan6 SpeedsBios Settings Configuration Boot Device Priority Hard Disk DrivesRemovable Drives CD/DVD DrivesSecurity Settings Change Supervisor PasswordChange User Password Clear User PasswordLoad Optimal Defaults Exit OptionsSaving Changes and Exit Discarding Changes and ExitLoad Fail-Safe Defaults Beep Code Error Message Description Appendix a Bios Error Beep CodesAmibios Error Beep Codes LED Indicators DS7/DS8 LED Post CodesAppendix B Bios Post Checkpoint Codes Uncompressed Initialization CodesBootblock Recovery Codes Uncompressed Initialization Codes Checkpoint Appendix B Bios Post Checkpoint Codes Checkpoint A9h Aah Abh B0h B1h 00h Page Intel 6300ESB I/O Controller Hub Appendix C Software InstallationSerial ATA Sata Adaptec RAID Configuration Utility ARC Configuring Sata RAIDAdaptec Sata HostRAID Controller Driver Using the Array Configuration Utility ACU Managing Arrays Viewing Array PropertiesDeleting Arrays Creating ArraysPage Assigning Array Properties RAID Levels Adding a Bootable Array To initialize drives Deleting a Bootable ArrayInitializing Disk Drives Page Page Rebuilding Arrays To rebuild an arrayUsing the Disk Utilities To access the disk utilitiesExiting the Adaptec RAID Configuration Utility You can choose from the following optionsInstalling the ICH5R/6300 ESBDriver Installing Other Software Programs and Drivers Installing Additional DriversSupero Doctor Supero Doctor III Interface Display Screen-II Remote Control Page Appendix D System Specifications Weight Power SupplySystem Cooling System Input Requirements