Toshiba SD-V396SU owner manual Clock setting, Auto Clock adjustment, To set Auto Clock to off

Press CALL to check the clock setting on the on screen display.

4

5

set is not programmed.

Wait at least three minutes and press

POWER.

2 Plug the AC Power cord to the AC outlet.

3 Make sure the DVD/VCR is turned off.

• If you press POWER, the Auto Clock

Connect the Antenna or Cable system.

• If you use a cable box, turn it on.

1

AUTO CLOCK setting

Preparation:

• Turn ON the TV and select the corresponding video input.

• Press VCR DVD selector to select the VCR mode. (The VCR indicator will light.)

Basic setup

Clock setting

The AUTO CLOCK function will automatically set the built-in clock (Month, Day, Year and Time) when the DVD/VCR is connected to an Antenna or Cable system and it is turned off. The DVD/VCR searches for a station in your area containing the necessary AUTO CLOCK setting signals. Once received, it will take approximately 4 minutes for the clock to set itself automatically.

CALL POWER VCR DVD

1,5

2,4

2,3

CALL	8 : 47AM MON	CH 125
DISPLAY
	STEREO SAP
		00 : 00 : 00 SP

6If the clock is not set, check the antenna condition. The AUTO CLOCK may not

function properly if the reception condition is not good.

AUTO CLOCK adjustment

The auto clock adjustment will be updated at 6:00 AM, 12:00 PM and 6:00 PM everyday when the

To set AUTO CLOCK to off

When shipped from factory the AUTO CLOCKTIMERMENURECis SETset to “ON”. But if you do not want AUTO CLOCK setting:AUTOREEAT

1 VCR MENU					SYSTEMCHAPSETUPSETUP	ONOFF
	Press VCR MENU.
					+/-/ENTER/MENUÒ
		SETUP	·
2		SET +			TIMERMENURECSET	ONOFF
	CH –	CH +			AP
	Press SET + or – to select “				AUTOREEAT
					CHSETUP
					SYSTEMSETUP
				SYSTEM SETUP”,
	then press ENTER.		·	+/-/ENTER/MENUÒ
		ENTER
		SET –
3		SET +			SYSTEMCLOCKSETUP
	CH –	CH +			LANGUAGE/IDIOMA/LAGUE
					NONOISEBACKGROUDN
	Press SET + or – to select “AUTO CLOCK”.
		ENTER
		SET –	·		+/STANDADDAYLIGHTAUTO-/ENTER/MENUCLOCKSAVINGTIMEÒONOFFTIME
4
		SET +
					SYSTEMCLOCKSETUP
					LANGUAGE/IDIOMA/LAGUE
	CH –	CH +			NONOISEBACKGROUND
					AUTOCLOCK	ONOFF
	Press ENTER to select “OFF”.
		SET –			STANDADTIME
		ENTER	·+/DAYLIGHT-/ENTER/MENUSAVINGÒ TIME

5Press VCR MENU repeatedly to return to the normal screen.

DVD/VCR turned off.

VCR MENU

• When the AUTO CLOCK is set to

•If you use a cable box and you want AUTO CLOCK adjustment to be performed, the cable box must be left on.

•The AUTO CLOCK adjustment is not effective when there is a difference of more than 5 minutes exists between the built-in clock time and the actual time.

24

SETUP “OFF”, the AUTO CLOCK adjust- ment does not function.

• Set the clock manually 26 .

2C53601A (E)p18-25 24 3/10/04, 11:31