Toshiba SD-V396SU Tuner setting, TV/CATV selection, Press Enter to select the TV or Catv mode

Tuner setting

This DVD/VCR is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the DVD/VCR’s memory. In addition to normal VHF and UHF channels, this DVD/VCR can receive up to 113 Cable TV channels. To use this DVD/VCR with an antenna, set the TV/CATV menu option to the TV mode. When shipped from the factory, this menu option is in the CATV mode.

VCR DVD

1,4

1,3

1,2

TV/CATV selection

Preparation:

•Turn ON the TV and select to the corresponding video input.

•Press VCR DVD selector to select the VCR mode. (The VCR indicator will light.)

1	Press VCR MENU. Press SET + or – to select
	“CH SETUP”, then press ENTER.
	SETUP				AUTOTIMERMENUREEATRECSET	ONOFF
					AP
	VCR MENU				CHSETUP
					SYSTEMSETUP
	SET +		·	+/-/ENTER/MENUÒ
CH –		CH +
	ENTER

SET –

2Press SET + or – to select “TV/CATVCHADD/DELETUTOSETUPTVCHCATVMMORYE”.

	SET +		·+/-/ENTER/MENUÒ
CH –		CH +
	ENTER
	SET –

3Press ENTER to select the TV or CATV mode.

CHADD/DELETUTOtheSETUPTVCHselectedCATVMMORYE mode.CH – SET – CH +SET +ENTERThe arrow indicates

TV - VHF/UHF channels
CATV - CABLE TV channels	·+/-/ENTER/MENUÒ

4Press VCR MENU until the menu screen is cleared.

VCR MENU

SETUP

Note:

You can’t select “CH SETUP” if you set the channel to “L1” or “L2”.

Setting channels automatically

	CH –	CH +	CHSETUP				Basic
						UTOTVCHCATVMMORY
1 select “AUTO CH MEMORY”.						+ or – to
	Repeat left step 1 and press
	ENTER				ADD/DELETE		setup
	SET +				+/-/ENTER/MENUÒ
	SET –			·
2	Press ENTER.
			Auto tuning will begin. The channel dis-
			play will count up and when finished,
			the screen returns to normal.
	SET +
						CH 002
	CH –	CH +
	ENTER

SET –

27

2C53601A (E)p26-31 27 3/10/04, 11:32