Toshiba SD-V396SU Loading and unloading a cassette tape, Unloading, To prevent accidental erasure

Playback (VCR)

Loading and unloading a cassette tape EJECT

Use only video cassette tapes marked and .

Loading

Push the center of the tape until it is automatically inserted.

Automatic power ON

Insert the cassette tape with its labeled side facing up and the erase prevention tab positioned at your left. An inverted cassette tape cannot be inserted.

Erase prevention tab

Basic setup

When you insert a cassette tape the DVD/VCR power will turn ON automatically.

Automatic playback

When loading a cassette tape without an erase prevention tab, playback will start automatically.

Unloading

1 Press EJECT on the front panel or on the Remote. 2 Remove the cassette tape.

Automatic tape eject

This DVD/VCR will automatically rewind the tape when the tape has ended. Once the tape is rewound to its beginning, the cassette tape will be ejected automatically.

Playback (VCR)

To prevent accidental erasure

To prevent accidental erasure

Remove the erase prevention tab with a screwdriver.

Screwdriver

Erase prevention tab

To record again

Cover the hole with a piece of adhesive tape.

Adhesive tape

Tape speed and maximum recording time

Tape Speed			Video cassette tape
	T-160	T-120		T-90	T-60	T-30
SP (Standard Play)	2-2/3 hours	2 hours		1-1/2 hours	1 hour	30 minutes
SLP (Super Long Play)	8 hours	6 hours		4-1/2 hours	3 hours	1-1/2 hours

29

2C53601A (E)p26-31 29 3/10/04, 11:32