Toshiba SD-V396SU One-touch Timer Recording OTR, To a maximum of 6 hours, To cancel OTR

Page 36

Recording (VCR)

One-touch Timer Recording (OTR)

VCR DVD

The One-touch Timer Recording feature provides a simple and

4

convenient way to make a timed recording.

2

 

5

STOP 4

One-touch Timer Recording (OTR)

Preparation:

Turn ON the TV and select to the corresponding video input.

Press VCR DVD selector to select the VCR mode. (The VCR indicator will light.)

Example: One-touch Timer Recording for 30 minutes.

4Press Number buttons or CH +/– to select the channel to be recorded.

1

2

3

 

SET +

CH 110

 

 

 

 

 

4

5

6

CH –

 

CH +

 

ENTER

 

SET –

7 8 9 0

1Load a cassette tape with the erase prevention tab intact.

The VCR will automatically turn on.

2Press SP/SLP to select the desired tape speed SP or SLP.

The tape counter and “SP” or “SLP” will appear on the screen for about 4 seconds.

SP/SLP

PLAY MODE

00 : 00 : 00 SP

3Set “TV” or “CATV” option to the appropriate position 27 .

TV - VHF/UHF channels

CATV - CABLE TV channels

36

5Press REC/OTR. Recording begins. Press the button again to stop recording after 30 minutes. Each additional press of REC/OTR will increase recording time as shown in the chart below, up

to a maximum of 6 hours.

The OTR and recording time will appear on the screen for about 4 seconds. And, “ ” will appear on the display.

Press

Recording time

Press

Recording time

once

NORMAL REC

6 times

3:00

twice

0:30

7 times

4:00

3 times

1:00

8 times

5:00

4 times

1:30

9 times

6:00

 

 

 

 

5 times

2:00

10 times

NORMAL REC

 

OTR 0 : 30

REC/OTR

CH 110

 

 

INDEX

To cancel OTR

Press STOP or turn off the power.

” will appear on screen for about 4 seconds.

Note:

If you wish to watch the DVD playback during OTR or standard recording, press VCR DVD selector to change to DVD mode and perform the DVD playback 43 .

2C53601A (E)p32-37

36

3/10/04, 11:32

Image 36
Contents SD-V396SU Introduction Location of the required MarkingS3125A IntroductionLightning HeatDisc NEC SectionS2898A Precautions Do not use the DVD/VCR when moisture condensation may occurTo obtain a clear picture WaitOn handling discs Structure of disc contents On cleaning discsOn storing discs On Video CDs Playable discsDVD Contents Identification of controls Front panelRear panel Display window VCR operation statusDVD/CD/VCD operation status While watching TVRemote control SkipBattery precautions OperationAntenna connections Antenna to DVD/VCR connectionConnections Combination VHF/UHF Antenna with 75 ohm Coaxial CableSet the TV/CATV menu option to TV mode DVD/VCR to TV connectionConnections TV with 300 ohm UHF and 75 ohm VHF Antenna inputsCatv Cable TV connections Splitter Incoming Cable Splitter Converter/DescramblerConnecting to a TV Connecting to a TVTo wall outlet Component videoConnecting to optional equipment Connecting to an amplifier equipped with a DTS decoderMPEG2 sound Setting the video channel Setting the video channelBasic setup When a TV is connected with the 75 ohm coaxial cable onlySetting the language Setting the languagePreparation Press VCR MenuClock setting Auto Clock adjustmentTo set Auto Clock to off Function properly if the reception condition is not goodTo set Standard Time OFFAuto Manual clock setting Press VCR MENU.VCR MenuPress SET + or to set the month, then press EnterTuner setting Press Enter to select the TV or Catv modeTV/CATV selection TV VHF/UHF channels Catv Cable TV channelsTo ADD/DELETE channels Noise eliminationLoading and unloading a cassette tape LoadingUnloading To prevent accidental erasureCassette tape playback PlaybackRewind or forward the tape Special playback Convenience function Repeat playback Zero return functionClock/counter display Video index search system Sqpb S-VHS Quasi PlaybackCounter ClockRecording a TV program Recording a TV programRecording VCR VHF/UHF/CATV Channels CatvTo stop recording To stop recording temporarilyRecording one program while watching another One-touch Timer Recording OTR One-touch Timer Recording OTRTo cancel OTR Set TV or Catv option to the appropriate positionTimer recording Timer recordingThrough VCR Menu To return to the normal screen To confirm or cancel a program To cancel Timer programIf the programs overlap another Press VCR Menu repeatedly until the menuStereo recording and playback Second Audio Program SAP Other functions VCROutput selection Listening to SAPDuplicating a video tape Duplicating a video tapeConnection with second VCR Connection with CamcorderRecording a DVD/CD disc Duplicating a DVD or CD discPress Play to start playback Press REC/OTR to start recordingTo start playback in the stop mode Playing a discBasic playback Basic playback DVDTo pause playback still mode To obtain a higher quality pictureAbout To stop playbackVCD Playing in fast reverse or fast forward directions Vcddvd Playing frame by frameVcddvd Playing in slow-motion VCD Locating a chapter or trackMP3/WMA/JPEG playback CD MP3/WMA playbackAdvanced playback DVD MP3/WMA/JPEG CD InformationJpeg CD playback PressPress Stop to end playback File menu appears on the TVSetting the Jpeg Interval Setting the Select Files Zooming Jpeg CD Changing angles Jpeg CDCancel Zooming/Locating desired sceneVcddvd Zooming Locating desired sceneMarking desired scenes Marking the scenesVCD Returning to the scenes Repeat playback/A-B Repeat playback VCD A-B Repeat playbackCD/VCD To cancel program playback Program playback/Random playback CDProgram playback VCD Random playbackChanging angles/Title selection/DVD menu Changing anglesTitle selection DVD menuSetting surround sound Function setup DVDDVD Changing soundtrack language During disc playback press AudioSetting subtitles/Karaoke playback Turning the subtitles on and offChanging the subtitle language Karaoke playbackSetting E.B.L L. Enhanced Black LevelPress or ENTER, then press or to select E.B.L Press / or Enter to select On or OffSetting the aspect ratio of TV screen Setting the aspect ratio of TV screenSetting on screen display/Status display of disc Setting on screen displayVcdcd Status display of disc Video CDPress Setup in the stop mode Press or to select Sound Press or ENTER, then press or to select Desired settingDynamic Range Control Dynamic Range ControlParental control setting Parental control settingIf you forget the password To change the parental levelTo change the parental level Playback will commence if the entered Password was correct Temporary disabling of rating level by DVD discLoad a DVD disc and press Play or OPEN/ Close on the unit ReturnSetting OSD language VCD Setting OSD languageSetup language can be selected Press or Enter to select OSD LanguageSetting language Setting languageSelecting Progressive scan VCD Selecting Progressive scanLanguage code list OthersTroubleshooting Symptoms Possible Solutions DVD/VCRSpecifications Supplied accessoriesGeneral Input/OutputLimited warranty Others 04/04 U Referencìa rápida PrecaucionInstrucciones Importantes Conexión a un televisor Ajuste del canal de videoSeleccion de idioma en pantalla Ajuste de reloj automatico Ajuste de reroj manualSeleccion de TV/CATV Ajuste automático de los canalesReproducción Camara lentaAvance cuadro a cuadro Rebobinado o avance rápido de la cintaSeleccione la opción Timer REC SET y presione Enter Para cancelar OTRGrabacion por temporizador Presione SET + o para seleccionar el N deReproducción básica DVD Reproducción con avance rápidoReproducción con retroceso rápido Reproducción FijaBúsqueda de un capítulo o canción Funciones básicas del control remotoColoque las pilas Notas sobre los derechos de autor