Toshiba RD-XV47KE manual 100 EN, Before recording, make sure, Accidental erasure prevention

Recording and One-touch Timer Recording (OTR)

Basic Recording

To play back a tape, turn on the TV and be sure to select the input to which the unit is connected.

2 Press [VCR].

3 Insert a pre-recorded tape, then press [PLAY P] to begin playback.

4 During playback, press [PAUSE p]. Playback will be paused and sound will be muted.

5 Press [PLAY P] to resume playback.

6 Press [STOP S] to stop playback.

7 Press [OPEN / CLOSE O] to eject the tape.

Note

1 Press [ the unit.

ON / STANDBY] to turn on

E3B90ED_EN.book Page 100 Friday, February 23, 2007 12:38 PM

VCR Functions

Playback

VCR

•When a tape without record tab is inserted, the unit will start playback automatically.

•Tracking will be automatically adjusted upon playback. To adjust the tracking manually, press [PROG. / ].

VCR

Before recording, make sure:

•The desired channel is selected by pressing [the Number buttons] or [PROG. / ] on the remote control.

•There is a tape with a record tab in the unit.

•The desired recording speed is selected in SP (standard play) or LP (long play) mode by pressing [REC MODE] on the remote control.

Tape speed		Recording / Playback Time
	Type of tape	E60	E120	E180	E240
	SP mode	1 hour	2 hours	3 hours	4 hours
	LP mode	2 hours	4 hours	6 hours	8 hours

1 Turn on the unit and insert a recordable tape.

Make sure that the TV input is set on the unit.

2 Press [VCR].

3 Press [REC I] to start recording.

To temporarily stop recording or to resume it, press [PAUSE p].

After the unit has been in pause mode for 5 minutes, it will stop automatically to protect the tape and the video head from damage.

4 Press [STOP S] when the recording is completed.

Accidental erasure prevention

To prevent accidental recording on a recorded cassette, remove its record tab. To record on it later, cover the hole with cellophane tape.

Record tab

Note

•Although you can playback a videotape recorded in the SP or LP mode on this unit, SLP mode recording is not available.

•Timer Recording is not available for VCR.

•When VCR recording and the Timer Recording are overlapping, the Timer Recording has its priority.

•The unit will automatically switch to the programmed channel 15 seconds before the programmed time, and the VCR recording will be cancelled except when their recording channel is the same. If their recording channel is the same, the Timer Recording will start without cancelling the VCR recording, and the recording will be made on both VCR and the HDD / DVD.

To view one channel while recording another: If you want to watch the TV programmes, simply select the channel you want to watch with the TV’s remote.

100 EN