Toshiba RD-XV47KE Setting for External Connection AV3, Dubbing from the External Devices, 56 EN

E3B90ED_EN.book Page 56 Friday, February 23, 2007 12:38 PM

Setting for External Connection (AV3)

Connect the external equipment using either the input jacks, AV1(TV) (Rear), AV2(DECODER) (Rear) or AV3 (Front). However, for AV3 jacks, you have to select S-VIDEO input or VIDEO input jacks depending on the connected devices.

Use a commercially available Scart, S-Video or Video cable and an Audio cable for this connection.

1 Press [SETUP] in stop mode. Setup Menu will appear.

2 Select “Initial Setting” using [Cursor U / D], then press [ENTER].

Setup Menu	01/01/07(Mon)	19:34
Disc Management
Editing
Dubbing
Timer Programme
Title List
Initial Setting
Digital Audio Setting
Playback
Recording
Display

3 Select “Select Video” using [Cursor U / D], then press [ENTER].

Initial Setting 01/01/07(Mon) 19:34

OSD Language

Clock Setting

Channel Setting

TV Aspect

Select Video

Video Out

4 Select the video input type you use,

“Video In” or “S-Video In”, using [Cursor U / D], then press [ENTER].

	Initial Setting	01/01/07(Mon) 19:34
OSD Language
Clock Setting		Video In
Channel Setting		S-Video In
TV Aspect

Select Video

Video Out

The selected setting will be checked and activated.

• The default setting is “Video In”.

5 Press [SETUP] to exit.

Dubbing from the External Devices

VR	Video
HDD DVD-RW	DVD-RW DVD-R

DVD+RW DVD+R VCR

When you dub a title has bilingual audio to Video mode DVD-RW / R and +VR mode DVD+RW / R, select an appropriate audio format in the “Bilingual Recording Audio” menu on page 40.

1 Turn on the TV. Select the appropriate external input channel.

(See pages 23 to 24.)

2 Select the media.

Dubbing to HDD:

Press [HDD] first.

Dubbing to DVD:

Press [DVD] first and insert a disc.

• It may take awhile to load the disc.

Dubbing to a videotape:

Press [VCR] and insert a videotape.

3 Select the appropriate external input channel of this unit by pressing [INPUT SELECT ]. You also can use [PROG. / ].

•If you are using the jacks on the front, set the channel to “AV3”.

•If you are using the jacks on the rear, set the channel to “AV1” and “AV2”.

4 Select a Rec Mode by pressing [REC MODE].

Refer to “Rec Mode” on page 35 for HDD / DVD or page 100 for VCR.

5 Press [I REC] (of the dubbing device) on this unit to start dubbing.

6 Press the PLAY button on the external device to dub from.

7 For HDD or DVD:

Press [STOP S] to stop dubbing.

•This operation may take awhile to be completed. Then stop the external device.

For VCR:

Press [STOP / EJECT O/S] to stop dubbing.

Then stop the external device.

Note

•To avoid mistakes, it is recommended to use the buttons on the front panel to operate.

•Read also the instructions for the external device thoroughly.

•If you want to monitor the programme that you are recording, make sure the device such as a Satellite Box is powered off or press [DISPLAY] when it is connected to AV2.

•NTSC dubbing is prohibited in this unit.

56 EN