Toshiba RD-XV47KE Connecting to External Equipment, Digital Audio for Better Sound Quality, 24 EN

E3B90ED_EN.book Page 24 Friday, February 23, 2007 12:38 PM

3 Connect the AUDIO OUT jacks of this unit to the analogue Audio input jacks of your TV. Use a commercially available Audio cable.

AUDIO S-VIDEO Component

	IN		IN	or	Video IN
					Y PB/CB	P /CR
	S-Video					Component
Audio cable						Video cable
	cable (not
(not supplied)						(not supplied)
	supplied)
DVD / VCR		HDD/DVD
DECODER)	DIGITAL	AUDIO	S-VIDEO COMPONENT
	AUDIO OUT	OUT	OUT	VIDEO OUT
					ANTENNA
	COAXIAL	L			IN
1 (TV)				PB
				/CB
		R
				PR	OUT
				/CR

Note for a TV with no S-Video input jack or Scart socket:

•This unit has no RF modulator, so this type of TV cannot be used.

•Only component connection is compatible with the Progressive Scan.

Connecting to External Equipment

This unit has three input terminals, AV1(TV) or AV2(DECODER) on the rear panel and AV3 on the front panel. Be sure that all the units are off before making any connections.

Recording from a HDD / DVD player, VCR, Satellite Box or other Audio-Video equipment with a Scart output socket (AV2)

AV output socket (Scart)

Scart cable (not supplied)

AV2(DECODER)

HDD /	DVD / VCR		HDD/DVD
AV2		DIGITAL	AUDIO	S-VIDEO	COMPONENT
		AUDIO OUT	OUT	OUT	VIDEO OUT

Y ANTENNA

Recording from a camcorder or other Audio-Video equipment with no Scart output socket (AV3)

If no S-Video input jack is available, connect to VIDEO input jack on the front panel using an RCA Video cable.

Set “S-Video In” when using S-VIDEO input jack. (See page 56.)

AV3 (Front)

HDD/DVD

DVD REC

HDD DVD

AV3

S-VIDEO VIDEO L R

S-Video cable	Audio cable
(not supplied)	(not supplied)

S-VIDEO AUDIO

OUT OUT

Digital Audio for Better Sound Quality

Digital audio		Dolby Digital decoder,
input jack		DTS decoder or
		MPEG decoder, etc.
	COAXIAL

Coaxial cable (not supplied)

COAXIAL L

R

HDD/DVD

DIGITAL	AUDIO	S-VIDEO	COMPONENT
AUDIO OUT	OUT	OUT	VIDEO OUT

Y ANTENNA

COAXIAL	L	IN
AV1 (TV)		PB
		/CB

COAXIAL L

IN

R

PR	OUT
/CR

Note

•When you record a TV programme from a Satellite Box, you must connect a Scart cable to AV2(DECODER). (See page 47.)

•When AV2 is connected, the signal from the AV2 will be output automatically. If you want to monitor the signal from other input, you must press [DISPLAY] first. Then, select the desired input to monitor with [INPUT SELECT ].

PB
/CB
R
PR	OUT
/CR

The connections illustrated above are optional for better sound.

1 For clear digital sound quality, use the DIGITAL AUDIO OUT (COAXIAL) jack to connect your digital audio equipment.

If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.

24 EN