Toshiba RD-XV47KE After You Have Completed Connections, Connecting to an MD deck or DAT deck

E3B90ED_EN.book Page 25 Friday, February 23, 2007 12:38 PM

Connecting a Dolby Digital™ decoder, DTS decoder or MPEG decoder

•Connecting Multi-channel Dolby Digital decoder allows you to enjoy the Multi-channel Dolby Digital surround system as well as DTS decoder, Multi- channel surround system.

•After connecting to a Dolby Digital decoder, set “Dolby Digital” to “Bit Stream” in “Digital Audio Setting”. (See page 93.)

•After connecting to a DTS decoder, set “DTS” to “On” in “Digital Audio Setting”. (See page 94.)

•After connecting to a MPEG decoder, set “MPEG” to “Bit Stream” in “Digital Audio Setting”. (See page 93.)

Connecting to an MD deck or DAT deck

•The audio source recorded in Dolby Digital Multi- channel surround format cannot be recorded using an MD or DAT deck as a digital sound.

•If not connected to a Dolby Digital decoder, set “Dolby Digital” to “PCM” in “Digital Audio Setting” (see page 93). Playing back a DVD using incorrect settings may generate noise distortion, and damage speakers.

•Set “Dolby Digital” and “MPEG” to “PCM” and set “DTS” to “Off” in “Digital Audio Setting” (see pages 93 and 94) for connecting to an MD or DAT deck.

•You can use AUDIO OUT jacks for the connection of your audio system.

After You Have Completed

Connections

Switch the input selector on your TV to an appropriate external input channel. For details, refer to the Owner’s Manual of your TV.

Note

•Connect this unit directly to the TV. If the AV cables are connected to a VCR, pictures may be distorted due to the effects of the copy protection system.

Introduction Connections Basic Setup Recording Playback

Editing Function Setup VCR Functions Others

EN 25